WILDAGENT trap detector The electronic hunting assistant for modern trapping Safe and reliable due to regular status messages With the WILDAGENT catch detector, you not only save time and travel costs, but also increase your catch rate due to less human activity at the trap. With the WILDAGENT trap detector you get a possibility to monitor your live traps intelligently. If the trap is successful, you can take action without much delay. The electronic trap detector sends you, or several recipients, an immediate alarm message via SMS or phone call when the trap is triggered by a magnetic break. In addition to the trap message, you will receive - depending on the configuration up to 5 times a day - regular status messages about the condition of the trap. The proper functioning of the electronic helper is essential for trapping, which is why the status messages also contain information about the battery charge level and reception strength. The WILDAGENT trap detector comes without SIM lock and subscription model, so you can use any SIM card (SMS sending must be possible). Even without technical knowledge, the trap detector is quickly set up and ready for use.   Technical Data - WILDAGENT trap detector Batteries 4x AA (1,5V) Colour Camouflage Release mechanism Wrecking-Magnet Netzwork GSM Temperature range -30°C up to +40°C Protection class IP67 zertified Weight 310g Measure 171 x 61 x 57 mm Scope of delivery: WILDAGENT trap detector GSM antenna Magnet with breakaway rope mounting strap Short manual (English) Detailed manual in German For operation, 4x AA batteries and a SIM card are also required, which can send and receive SMS text Messages.

NiteCore Lithium Ion Battery Type 16340 with 3.6V and 950mAh. With protection circuit (PCB / IC-Protection) against short circuit, overcharging, and deep discharge. Made from a DLG cell. The maximum discharge current is 2A. Technical Specifications: Length (mm): 34.1 Diameter (mm): 16.6 Voltage: 3.6 Capacity (mAh): 950

SYTONG Focus IR Illuminator 8500nm Focusable torch with 940nm Ideally suited for night vision devices, e.g. Sytong & Pard 9000mW power Memory function 3-step switching 850nm up to approx. 400m range (focused) The Sytong Focus IR lamp is a focusable infrared torch with a 850nm LED and 9000 mW power. With the help of the memory function, the lamp always switches on at the same level as it was preselected before switching off. The lamp is ideal for night hunting with night vision devices such as the Sytong or Pard. IR LED with 850 nm OSRAM LED with 9000 mW output working voltage 4.2 V 3-stage switching: Stage 1 / 100% Stage II / 80% Stage III / 50 Shock, weather and bullet resistant Polarity reversal, overcharge, discharge and overheating protection Material: High-tech aircraft aluminium AL-6061-T6 Power supply: 1x 18650 battery Battery life up to 4.5 hours Lamps -Length: 132mm Lamp head diameter Ø 30mm Housing diameter Ø 24.8mm Lamp weight 100g (without battery) Scope of delivery: SYTONG FOCUS IR Illuminator 850nm Lanyard / Cord Switch

Maximtac HD-IR of the 3rd generation with 850 nm and 940 nm LED unit A focusable and dimmable hunting torch specially developed for night hunting! The new 3rd generation Maximtac HD-IR flashlight is equipped with a silent and dimmable limit switch and has a very powerful LED unit that achieves an output of 10,000 mW. The hunting lamp can be dimmed continuously from 2 % - 100 % and focused via the threaded head. A quick and uncomplicated change of LED units ensures that you can adapt the wavelength to the conditions. The hunting lamp also has a charge level indicator on the back. It is shockproof, bulletproof and weatherproof (splashproof). Technical data Brightness continuously dimmable 2 % - 100 % silent on/off switch Threaded head for Focusing LED unit in two different wavelengths 850 nm + 940 nm Charge status Display Range: 850 nm = 420 m / 940 nm = 210 m (focused) Housing Ø 25.4 mm (suitable lamp holder can be found here and here) Length 165 mm Weight 135 g Head diameter 38 mm OSRAM LED with 10,000 mW Output Memory function Working voltage 4.2 V Weatherproof

SYTONG Focus IR Illuminator 940nm Focusable torch with 940nm Ideally suited for night vision devices, e.g. Sytong & Pard 9000mW power Memory function 3-step switching 940nm up to approx. 200m range (focused) The Sytong Focus IR lamp is a focusable infrared torch with a 940nm LED and 9000 mW power. With the help of the memory function, the lamp always switches on at the same level as it was preselected before switching off. The lamp is ideal for night hunting with night vision devices such as the Sytong or Pard. IR LED with 940 nm OSRAM LED with 9000 mW output working voltage 4.2 V 3-stage switching: Stage 1 / 100% Stage II / 80% Stage III / 50 Shock, weather and bullet resistant Polarity reversal, overcharge, discharge and overheating protection Material: High-tech aircraft aluminium AL-6061-T6 Power supply: 1x 18650 battery Battery life up to 4.5 hours Lamps -Length: 132mm Lamp head diameter Ø 30mm Housing diameter Ø 24.8mm Lamp weight 100g (without battery) Scope of delivery: SYTONG FOCUS IR Illuminator 940nm Lanyard / Cord Switch

Maximtac HD-IR-Pro of the 3rd generation with 850 nm and 940 nm LED unit A focusable and dimmable hunting torch specially developed for night hunting! The new 3rd generation Maximtac HD-IR-Pro flashlight is equipped with a silent and dimmable limit switch and has a very powerful LED unit that achieves an output of 10,000 mW. The hunting lamp can be dimmed continuously from 2 % - 100 % and focused via the threaded head. A quick and uncomplicated change of LED units ensures that you can adapt the wavelength to the conditions. The hunting lamp also has a charge level indicator on the back. It is shockproof, bulletproof and weatherproof (splashproof). Technical data Brightness continuously dimmable 2 % - 100 % silent on/off switch Threaded head for Focusing LED unit in two different wavelengths 850 nm + 940 nm Charge status indicator Range: 850 nm = 500 m / 940 nm = 240 m (focused) Housing Ø 25.4 mm (suitable lamp holder can be found here and here) Length 172 mm Weight 175 g Head diameter 38 mm OSRAM LED with 10,000 mW Output Memory function Working voltage 4.2 V Weatherproof Scope of delivery: Maximtac HD-IR-Pro Gen 3 Flashlight 850 nm IR unit (pre-assembled) 940 nm IR unit 18650 battery with 3450 mAh Various O-rings German operating instructions

Primos Trigger Stick Gen. 3 - Tall Tripod Includes Camera/Optic Mount Leg Angle Lock Reinforced Swivel Joint for Smooth and Quiet Panning Non-Slip Backed Grip Quick-Change System with V-Yoke and Integrated Lock The Primos Trigger Stick Gen. 3 - Tall Tripod is extremely fast and easy to adjust to the desired height with just one hand. It features a lightweight yet exceptionally robust platform for rifles or optical devices. The newly developed Quick-Change Yoke System makes switching easier than ever before. A freshly designed handle with a non-slip surface ensures a secure grip, while a reinforced swivel joint enables smooth panning movements. This shooting stick comes with a camera/optic mount, allowing you to attach cameras, scopes, or the 2-point rifle rest (not included). The maximum weight capacity is manufacturer-rated at 15 kg. Features: Adjustable length from 61 to 157 cm Total weight: 1,400 g

SYTONG IR Illuminator Quick-Release-Mount for Picatinny Quick mounting for torches with 24-26mm housing Mounting for Picatinny rail with quick-release lever Suitable for e.g. Pard & Sytong Quick-release lever for tool-free mounting Fits all IR lamps which we have in stock Adjustable quick mount for IR torches with 24-26mm housing diameter. Inner ring diameter: 24 mm - 26 mm Material: High Tech Aluminium AL-6061-T6 Weight: approx. 70g

The Nitecore CI2 USB-C Charger is a USB-C charger with two charging slots. Compatible with Li-Ion, NiMH, and Ni-Cd batteries. With the appropriate charging adapter (QC/PD adapter), a charging current of 3A can be achieved in one charging slot. The Nitecore CI2 automatically detects the charging status, capacity, and type of the inserted battery and automatically selects the correct charging method and charging current. Charging progress is indicated by three green LEDs. Defective or incorrectly inserted batteries are identified and displayed by the CI2. Intelligent protection circuits such as short circuit protection, reverse polarity protection, temperature monitoring, etc., protect the battery and the charger. Input Voltage: 5V-2A / 9V-2A / 12V-1.5A, 18W (MAX) Output Voltage: 4.2V±1% / 1.48V±1% Quick Charge Mode: 3A*1 MAX / 1.5A*2 MAX Standard Mode: 2A*1 MAX / 1A*2 MAX Features: Length (mm): 148 Width (mm): 65 Height/Depth (mm): 37 Total Weight (g): 121 Charging Current (A): 3 Material: Plastic Compatible with the following battery types: IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700 Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D Package Contents: Nitecore CI2, USB-C charging cable, User manual  

The GM05 universal mount from Nitecore is ideal for mounting flashlights and other equipment. Suitable for diameters from 25 mm to 35 mm. Suitable for diameters from 25 mm to 35 mm. Technische Daten: Length (mm): 110 Wide (mm): 55 Depth (mm): 35 Total weight (g): 95 Material:  breakproof plastic

Brunox LUB&COR 100ml High-Tech Lubrication & Corrosion Protection Specifically for Long-Term Preservation Discover BRUNOX LUB&COR, a high-quality long-term corrosion protection product specially developed for metallic structures and machinery. High-quality, highly resilient lubricant Free from silicone, PTFE, graphite, nano-ceramic particles. No resinification! No washing out – "all-weather resistant" Guaranteed lubrication effectiveness down to -41 °C Strong adhesive corrosion protection Indoor storage – corrosion protection for up to 3 years Functionality: Brunox LUB&COR is characterized by the formation of a uniform, non-drying corrosion protection film that penetrates even hard-to-reach corners and edges. This ensures effective long-term corrosion protection. At the same time, Brunox LUB&COR serves as a weather-resistant and resilient lubricant of the highest quality, resistant to acidic atmospheres and other environmental influences. Application Area: Ideal for long-term corrosion protection of metallic structures and machinery during storage and transportation in enclosed environments (up to 3 years), in covered outdoor areas (up to 1 year), and in open outdoor areas (up to 5 months). Application: Brunox LUB&COR is thixotropic and should be thoroughly shaken before use. Apply it evenly to the dry surface, optionally with a brush, airless, or compressed air gun. The recommended layer thickness is approximately 5 - 20 μm, meaning that one liter can treat 20 – 40 m2 of surface. After protection, Brunox LUB&COR can be removed with a cleaning agent, such as anionic surfactants. If the surface is slightly damp, pre-treatment with Brunox Gun Care Spray is recommended. Spray it into all crevices and corners to displace moisture, let water bead off, and wipe off the Brunox Gun Care Spray layer with a cloth before applying Brunox LUB&COR. Contents: 100 ml Brunox LUB&COR Product Safety: Warnings: !!! Danger !!! Please note that this product is flammable and classified as an inflammable aerosol. The container is under pressure and can burst when heated. In case of medical need, keep the label at hand. It must not get into the hands of children and must be protected from heat, hot surfaces, sparks, open flames, and other ignition sources. The spray should not be sprayed near open flames or other ignition sources and should not be pierced or burned, even after use. Exposure to direct sunlight should be avoided, and the product should not be exposed to temperatures above 50 °C. Repeated skin contact may lead to dry skin.

Nitecore Powerbank NPB1 - 5.000mAh, waterproof The Nitecore NPB1 is an IP68 waterproof powerbank with 5000mAh. Extremely compact and ideal for all outdoor activities. The NPB1 is Quickcharge capable and has a maximum output power of 18W. Charging is done via micro USB connector. Features: Waterproof to IP68 (2 meters water depth for max. 30 minutes, not suitable for diving). Breakproof 1 meter Power source: 21700 Li-Ion battery, 5000mAh Lock for use together with Nitecore HU60 Technical Data: Length (mm): 103 Diameter (mm): 27 Total Weight (g): 105 Kapacity (mAh): 5000 Material: Aluminium   Scope of delivery: Nitecore NPB1, Mirco USB cable

Discover the Blaser Carbon Shooting Stick 2.0 – your indispensable companion for precise aiming and secure shooting under demanding conditions. The Blaser Carbon Shooting Stick revolutionizes hunting technology by combining the highest aiming accuracy with maximum comfort. The innovative design and hunting-specific optimizations of the stalking stick set new standards in hunting practice. The swiveling pistol grip on the support fork allows you to reliably track game in a lateral range of up to 20 meters (at a shooting distance of 100 meters) without compromising stability. This flexibility can make the crucial difference when every fraction of a second counts. Made from robust yet lightweight carbon, the shooting stick weighs only 985 grams, ensuring effortless handling during long stalking paths or mountain tours. The noise-free foam grips and rubber foot caps guarantee silent operation in nature, a significant advantage for demanding stalking, mountain, and driven hunts. With a variable height adjustment from 1.24 meters to 1.98 meters, the shooting stick can be individually adjusted, allowing it to be optimally set for any shooting situation. The height adjustment is quick and precise via four twist locks, while the scale on the legs allows for exact and repeatable settings. The delivery includes a practical bag that not only facilitates transport but also optimally protects the shooting stick. Experience a new dimension of hunting precision with the Blaser Carbon Shooting Stick 2.0 and rely on quality and reliability when it matters. Increase your shooting accuracy and enjoy the benefits of thoughtful engineering and the best materials.

Nitecore Powerbank NPB2 - 10.000mAh, waterproof The Nitecore NPB2 is the second IP68 waterproof powerbank from Nitecore. The Nitecore NPB2 has a capacity of 10000mAh. Extremely compact and ideally suited for all outdoor activities. The NPB2 is Quickcharge capable and has a maximum output power of 18W. Charging is done via micro USB connector. The NPB2 can be used up to - 10 °C. The NPB2 is Quickcharge capable and has a maximum output power of 18W. Charging is done via micro USB connector. The NPB2 can be used up to - 10 °C. Features: Waterproof to IP68 (2 meters water depth for max. 30 minutes, not suitable for diving) Breakproof: 1 meter Power source: 21700 Li-Ion battery, 10000mAh Lock for use together with Nitecore HU60 Touch sensor for battery level control Technical Data: Length (mm): 105 Width (mm): 50 Height/Depth (mm): 28 Total Weight (g): 215 Charging current (A): 5V 2,4A (MAX) Capacity (mAh): 10000 Material: Fire retardant PC plastic Height (mm): 32 Weight (without Battery) (g): 295   Scope of delivery: Nitecore NPB2 Mirco-USB-cable

Ballistol Universal Oil Spray - Special Size 350 ml Ballistol Special Edition in a convenient 350ml spray bottle For over 110 years, Ballistol has proven itself as a specialized oil for a wide range of applications, including crafts, industry, agriculture, household, and garden. It is versatile and also finds use in automobiles and many other areas. Ballistol serves to care for, protect, and lubricate materials such as metal, wood, leather, rubber, plastic, fur, and skin. It possesses disinfecting properties and can neutralize weak acids, such as sweat. Furthermore, it penetrates even the finest cracks and crevices, remains non-sticky even after years, and complies with food safety standards. Ballistol is medically pure and biodegradable. It lubricates mechanisms, guards against rust, nurtures wood and leather, and keeps decay and mold at bay. It is also excellent for cleaning stainless steel and aluminum surfaces. Notably, Ballistol is the only universal oil that received a "Very Good" rating in dermatological tests. Contents: 350ml Ballistol Universal Oil Product Safety: Warnings: !!! Danger !!! The container is pressurized and may burst when heated. The contained aerosol is extremely flammable. It can create explosive or flammable vapor-air mixtures when used.

Brunox Gun Care Spray 100ml dissolves powder, lead, copper, tombac, and nickel residues protects against corrosion dispels moisture neutralizes sweat lubricates all parts contains no silicone, no PTFE, no graphite The Brunox Gun Care Spray provides comprehensive care for all metallic components. It cleans, lubricates, and maintains them in the best condition. This product has no adverse effects on paint, leather, wood, rubber, plastics, or textiles. It effectively dissolves grease, organic contaminants, and mineral residues without relying on silicone, Teflon, or graphite. In addition, it offers the following advantages: It dispels moisture and ensures reliable corrosion protection. It removes powder, lead, tombac, copper, and nickel deposits. It neutralizes hand and fingerprint marks as well as sweat. It stands out for its excellent creeping properties, leaving a thin protective film that does not harden or resinify. It contains only 3% propellant (CO2) and has a flashpoint of 78°C. Contents: 100 ml Brunox Gun Care Spray Product Safety: Warnings: !!! Danger !!! Please note that this product is flammable and classified as flammable aerosol. The container is pressurized and can burst when heated. In case of a medical emergency, keep the label at hand. Keep out of the reach of children and protect it from heat, hot surfaces, sparks, open flames, and other ignition sources. The spray should not be sprayed near open flames or other ignition sources and should not be pierced or burned, even after use. Avoid exposure to direct sunlight, and do not expose the product to temperatures above 50°C. Repeated skin contact may cause dryness of the skin.

The Nitecore NU32 is an update of the popular NU30 from Nitecore. The permanently installed Li-Ion battery with 1800mAh can be charged via a micro USB port in the lamp. The white main LED provides a maximum of 550 lumens. For close-range illumination, the NU32 has two CRI LEDs. Two additional red light LED's provide 9 lumens and maintain night vision capability. Power and burn time Turbo (550 lumens) for 1 hour*. High (190 lumens) for approx. 17 hours MID (33 lumens) for 50 hours Ultralow (1 lumen) for approx. 330 hours CRI LED's (19 lumens) for approx. 25 Hours Red light (9 lumens) for approx. 38 hours SOS Beacon (*this is a calculated value). Features: waterproof to IPX67 (rated). polycarbonate housing Two-switch operation Battery level indicator Color temperature: Power and burn time -Turbo (550 lumens) for 1 hour*. -High (190 lumens) for approx. 17 hours -MID (33 lumens) for 50 hours -Ultralow (1 lumen) for approx. 330 hours -CRI LED's (19 lumens) for approx. 2  Haupt-LED: ca. 6500K CRI-LED: ca. 5000K Technical Data: Length (mm): 63 Height (mm): 34 Wide (mm): 44 Weight (without Battery) (g): 77 Illuminant 1: CREE XP-G3 S3 LED Illuminant 2: 2x LED red + 2x High CRI LED white Illumination range max. (m): 125 Spot-Intensity (cd): 3900 Luminous power max.: 550 Lumen Scope of delivery: Nitecore NU32 USB Charging cable

Nitecore NU11: Versatile Head and Clip Lamp The Nitecore NU11 is the ideal choice for versatile applications. Thanks to the included headband, it can be used as a headlamp, or alternatively, it can be easily attached to equipment or a baseball cap with the clip. Battery and Charging Time The built-in 600mAh Li-Ion battery allows for a runtime of up to 6 hours and is conveniently charged via a USB-C port. Intuitive Control The new Nitecore NU11 features two innovative control options: Traditional button operation Touch-free control via gestures: Thanks to an integrated IR sensor, the lamp can be turned on and off with a simple "swipe". Technical Specifications Length: 50.2 mm Height: 59.1 mm Width: 18.7 mm Weight (without battery): 41 g Light source: 1 x White light LED, 1 x Red light LED Maximum beam distance: 50 m Maximum light output: 150 lumens Performance and Burn Time White Light Modes: High (150 lumens): up to 2.5 hours Low (45 lumens): up to 6 hours Red Light Modes: Constant (4 lumens): up to 30 hours Flashing (4 lumens): up to 60 hours Package Contents The Nitecore NU11 package includes: Nitecore NU11 lamp Headband USB-C charging cable User manual Additional Features Waterproof according to IPX5 Impact resistant up to a drop height of 1 meter Battery level indicator to monitor the charging status

The Nitecore SC4 is an intelligent 4-slot charger that can charge nearly all Li-Ion battery types, NiMH, NiCd, and LiFEPO4 batteries. The SC4 features a high-resolution LCD color display. The charging current can be adjusted individually based on the battery type. Each slot supports a maximum of 3A, with a total maximum charging current of 6A for all 4 slots combined. Compatible with: 10440, 10500, 12340, 12500, 12650, 13450, Li-Ion / IMR / 13500, 13650, 14350, 14430, 14500, 14650, LiFePO4 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650 Ni-MH (NiCd): AA, AAA, AAAA, C, D Features Up to 3A charging current per slot Manually selectable charging current options: 300mAh - 3000mAh Compatible with 1.2V, 3.7V, 4.2V, and 4.3V batteries High-resolution color LCD for real-time display of charging parameters Built-in power-saving function Optimized charging program for IMR batteries Automatic battery type detection, voltage, and current selection Manual voltage adjustment for LiFePO4 batteries (3.7V) and Li-Ion batteries (4.3V) Automatic charging current selection based on battery capacity Each charging slot charges and monitors individually and independently Integrated USB port Compatible with all USB devices Automatic charging stop after completion of the charging process Reverse polarity protection and short circuit prevention Reactivation of Li-Ion batteries Automatic time-dependent charging shutdown Temperature monitoring to prevent overheating damage Automatic internal resistance detection Heat-resistant plastic housing (fire retardant) Technical Specifications: Length (mm): 165 Width (mm): 110 Height/Depth (mm): 45 Total Weight (g): 385 Charging Current (A): 3 Material: Plastic

  The Nitecore UMS4 is a smart, QC 2.0 compatible USB charger with four charging bays and LCD display. The UMS4 can charge Li-Ion, Li-Ion IMR, NiMH/NiCd and LiFePO4 batteries. The Nitecore UMS4 charger detects the battery type, determines the battery condition, the charge level of the battery and automatically determines the correct charging method. The default charging current is 1000mA. However, this can be manually increased up to 2A depending on the battery type, and up to 3A in QC mode. Maximum charging current with one occupied slot: 3A, with 4 occupied slots 1A per slot. Deep discharged Li-Ion batteries can be reactivated in the UMS4 (please refer to the user manual). Features: QC Mode: 3,000mA*1 (MAX) 2,000mA*2 (MAX) 1,000mA*4 (MAX) Standard Mode: 2,000mA*1 (MAX) 1,000mA*2 (MAX) 500mA*4 (MAX) Compatible with the following battery types: Li-Ion, IMR, LiFePO4: 10440, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 25500, 26500, 26650, 26700 Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D Technical Data: Lenght (mm): 159 Width (mm): 107 Heigth/Depth (mm): 41 Total Weigth (g): 256 Input voltage: DC 5V/2A 12V/1.5A Output voltage: 4.35V±1% / 4.2V±1% / 3.7V±1% / 1.48V±1% Charging current (A): QC: 3A*1, 2A*2, 1A*4 / Standard: 2A*1, 1A*2, 0,5A*4 Material: Plastic

The Nitecore UI2 is a USB dual-slot charger that provides a maximum charging current of 2 x 800mA. The UI2 is also suitable for charging batteries with a low charging current of less than 2.9V. In this case, the UI2 only charges with 100mA. Deeply discharged batteries with protection circuits can be reactivated with the Nitecore UI2. Features: Overheating protection Short-circuit and reverse polarity protection USB Input Automatic shut-off after the charging process is complete Automatic selection of the appropriate charging method (CC or CV) Suitable for: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500. Technical specifications: Length: 126 mm Width: 60 mm Height/Depth: 32 mm Total weight: 80 g Output voltage: 4.2 V Charging current: 0.8 A Material: Plastic

Product Description: Nitecore HC65 UHE - 2000 Lumens - 3 Light Sources Experience the next generation of powerful headlamps with the Nitecore HC65 UHE. As the successor to the proven HC65 V2, it impresses with a modern design and a variety of technical innovations. Whether for outdoor adventures, craft activities, or rescue operations – the HC65 UHE is the ideal companion when reliable lighting is essential. Powerful Lighting with Three Light Sources The HC65 UHE offers an impressive maximum brightness of 2000 lumens through the main LEDs and a range of up to 222 meters. This is complemented by two additional light sources: White auxiliary light (40 lumens, CRI > 90) for realistic color rendering and wide close-range illumination. Red auxiliary light (15 lumens) with two brightness levels and a flashing mode – ideal for night vision or signaling. Optimized Energy Efficiency Thanks to the innovative NiteLab UHE LEDs, the HC65 UHE offers a higher lumen output per watt, extended runtimes, and reduced energy consumption. With the included Li-Ion battery NL1840HP (4000 mAh) and USB-C charging port, the lamp remains ready for use at all times. The runtimes range from 30 minutes in turbo mode to 82 hours in the lowest white light mode. Durability and Versatility The housing made of HAIII-anodized aerospace aluminum is extremely durable, water and dustproof according to IP68, and withstands drops from up to two meters in height. Thanks to a tilt mechanism (180°) and a 100° beam angle, the lamp can be adjusted flexibly. Additionally, it can be mounted on helmets with optional brackets. Comfort and Safety The new headband is particularly elastic, breathable, and offers high comfort even during prolonged wear. With an integrated battery level indicator, ATR temperature regulation, and a lockout mode for transport safety, you remain well protected at all times. Scope of Delivery Nitecore HC65 UHE Headband Li-Ion battery (4000 mAh, NL1840HP) USB-C charging cable Carrying case Technical Highlights Weight (without battery): 103 g Dimensions: 89.5 × 46 × 42.2 mm Main LED color temperature: approx. 6000 K, CRI LED: approx. 4500 K 8-core matrix optics for maximum light intensity With the Nitecore HC65 UHE, you are well-equipped – for any adventure, day or night!