RUSAN Modular Connector / Adapter Available for various clip-on devices Two-part modular system with bayonet system for high repeatability The RUSAN Modular Adapter consists of a clamping sleeve and a connector to enable repeatable and precise mounting of the clip-on device. The connector is screwed onto the clip-on device and remains there permanently, even when disassembled. This ensures that the point of impact remains exactly the same after mounting or dismounting the clip-on device. The connector is connected to the clamping sleeve, which is clamped to the daylight optics, in seconds via a bayonet lock. The RUSAN Connector / Adapter is available for various thread types depending on your clip-on device. M52x0.75 e.g. for Hikmicro Thunder 2.0 / 3.0, ThermTec, InfiRay, Dedal, Leica, Jahnke M43x0.75 e.g. for Liemke, Nightpearl M46x0.75 e.g. for Nitehog, Electrooptic, Lahoux etc. M49x0.75 e.g. for Dipol M33.5x0.75 e.g. for Guide, Nitehoh Viper etc. M35x1 e.g. for Pulsar Krypton, Proton etc.

AMR Thermo Vision Target Pads for Shooting Thermal Imaging Devices With the AMR thermal imaging target pads, this calibration is particularly efficient and cost-effective. Simply tear open the packaging (foil), remove the pad, peel off the protective foil on the back and attach the target pad to the desired location. The pad reaches its optimum calibration temperature of 38°C within a few minutes. Then target the thermal pad with the thermal imaging camera mounted on the firearm and optimize the thermal view. After 2-3 test shots, unintentional shot deviations between bullet holes and geometric center of the pad can be optimally determined thanks to the round shape and small diameter of the pad. To calibrate weapons with thermal imaging attachment 10 pads per pack Diameter approx. 4 cm Quick heating by activated carbon to 38°C Note: The thermal imaging target pads are sold without the box shown.

HIKMICRO LYNX Pro LE10S Thermal imaging camera in pocket format At an entry-level price! The LYNX Pro LE10S from HIKMICRO offers thermal imaging technology in a handy and compact housing. With the HIKMICRO LYNX Pro LE10S you get a very compact thermal imaging camera that can be stowed away in any exchange. The camera has a 256x192 pixel powerful VOx sensor with a pixel pitch of 12µm and a 800x600 Pixel OLED display. In contrast to its little brother, the LYNX LC06, the LE10 offers significantly more detection range and image sharpness thanks to the larger sensor. The field of view is very large at approx. 32m at a distance of 100m, so that you have a good all-round view at both short and longer distances. With the help of the highly sensitive sensor, heat sources can be detected up to approx. 500m. This makes the camera predestined for tracking as well as for hunting in the forest or at the hunting ground. In addition to the pure observation of heat sources, the HIKMICRO LYNX Pro LE10S offers extensive functions such as a stadiametric rangefinder or the possibility to transfer image and video recordings to your mobile device via W-LAN connection. Recordings can also be conveniently stored on the internal 8GB memory for later transfer via USB-C. All functions and settings (standby, screen brightness, contrast, zoom, colour mode, etc.) can be easily operated via four buttons. The built-in rechargeable lithium battery allows up to 8 hours of continuous operation. When WLAN transmission is switched on, the operating time is reduced to approx. 6 hours. Technical Data - HIKMICRO LYNX Pro LE10S Image Sensor 256x192 @12μm, VOx Focal length 9,7 mm NETD > 35 mK (@25°C,F#=1.1) Aperture F1.0 Spectral 8μm ~ 14μm Display 800 x 600 Pixel OLED Shutter Mode Auto, Manual, External Field of View (FOV) 18.00° x 13.55° FOV @100m approx. 32m Refresh rate 25Hz Detection range 500m Magnification 1x to 8x Digital zoom 1x, 2x, 4x, 8x Palettes Black Hot White Hot   Red Hot Fusion Diopter adjustment Yes Diametric Rangefinder Yes Capture Snapshot Yes Record Video Yes WiFi / App Yes Battery Time 8 hours Battery Type Lithium battery Built-in memory 8 GB Work Temperature -20° C / + 55 ° C Connections USB-C Protection level IP67 Weight 260g Dimension 158,3 x 61 x 57 mm Scope of delivery Thermal imager HIKMICRO LYNX Pro LE10S Lens cover USB cable Neoprene storage bag Quick Start Guide Anti-dust cloth Hand strap 3 years warranty on the thermal imager (2 years warranty on the integrated battery, 10 years warranty on the sensor)

RUSAN Cover for MAR Clamping This cover fits on the clamping sleeve of the RUSAN Modular Adapter. The cover protects the lens of your daytime optics from unwanted scratches and dirt.

RUSAN Modular Clamping Sleeve Fix with 3 Screws Available in various sizes to fit your target optics Special sizes available on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamping sleeve and a connector to enable repeatable and precise mounting of the attachment device. The clamping sleeve of the RUSAN Modular Adapter is clamped onto the daylight optics using three screws. The clamping sleeve remains permanently on the lens and is available in various sizes. Before ordering, please carefully check the required size by measuring the outer diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The determined value is exactly the correct size you need. If you are unsure, please include the type designation of your daylight optics when ordering.

RUSAN Modular clamp sleeve with screw Available in various sizes to fit your target optics Special sizes can be ordered on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamp sleeve and a connector to enable precise and repeatable mounting of the attachment device. The RUSAN Modular Adapter's clamp sleeve is clamped onto the daylight optics using a screw. The clamp sleeve remains permanently on the lens and is available in different sizes. Before ordering, please check the required size carefully by measuring the outside diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The value obtained is precisely the correct size you need. If you are unsure, please provide the type designation of your daylight optics when ordering.

Precise Hunting Duo Connector For absolutely repeatable mounting on the scope. Select the desired size according to the connection thread of your attachment The Duo-Connector has five locking lugs with which it can be easily, quickly and, above all, absolutely repeatably connected to all Präzise Jagen clamping sleeves. In order to screw the Duo connector firmly to the attachment, the connector has an internal thread in various selectable sizes. The Duo connector is made of high-quality aluminium in one piece and has an anodised surface that protects against corrosion. Select the correct internal thread to suit your attachment: for HIKMICRO Thunder TE19C, TH35C, TH35PC and TQ50C you need the Duo connector M52x0.75 mm and the HIKMICRO adapter ring. for InfiRay CL42, CH50, CML25 / Liemke Merlin 25, Merlin 35, Merlin 42 you need the Duo connector M52x0.75 mm for Guide/JSA TA435, TA450 you need the Duo connector M33,5x0,75 mm for Pulsar Proton XQ30 and Pulsar Krypton XG50 you need the Duo-Connector M35x1 mm

NiteCore Lithium Ion Battery Type 16340 with 3.6V and 950mAh. With protection circuit (PCB / IC-Protection) against short circuit, overcharging, and deep discharge. Made from a DLG cell. The maximum discharge current is 2A. Technical Specifications: Length (mm): 34.1 Diameter (mm): 16.6 Voltage: 3.6 Capacity (mAh): 950

RUSAN Cover for MAR Connector This cover is compatible with all connectors of the RUSAN Modular Adapter. The cover protects the eyepiece of your device from unwanted scratches and dirt.

Precise hunting ferrule For absolutely repeatable mounting on the scope. Select the desired size according to your external lens diameter This clamping sleeve is part of the absolutely bulletproof and repeatable Precise Hunting Multi-Adapter. In order to achieve a repeatable connection between the riflescope and the attachment, the clamping sleeve is screwed tightly onto the objective over a length of 40mm and by means of 3 screws. The clamping sleeve remains permanently on your daylight optics to meet the highest precision requirements. The clamping sleeve is made of high-quality aluminum in one piece and is protected against corrosion by an anodized surface. The inside of the clamping sleeve is covered with a protective film that protects your optics from scratches and increases adhesion. The exact alignment of the clamping sleeve to the attachment is achieved with a special inner contour. On the front side is a serration - the basis for fast and repeatable mounting of the attachment by means of the Duo-Connector. The counterpart, the Duo connector, is firmly and permanently screwed onto the attachment. The Duo connector has five locking lugs with which both parts can be connected easily, quickly and, above all, with absolute repeat accuracy.  With the Duo Connector, you can easily use the attachment on different riflescopes. To determine the appropriate diameter for mounting the clamping sleeve, the outer diameter of the optic must be measured. Ideally, use a caliper gauge for this Purpose.  

The Rusan reduction ring is needed to use the universal Rusan quick release adapters ARM-52 with the HIKMICRO Thunder TH35C / TQ50C. The reduction ring is screwed into the thread of the Rusand adapter. Note: This is only the reduction ring to adapt the thread of the Rusan universal adapter with that of the HIKMICRO Thunder. If you need a complete adapter for your thermal imaging attachment, please order additionally the Rusan Q-R universal adapter ARM-52 with M52x0.75 thread.  

HIKMICRO LYNX Pro LE15S Pocket-sized thermal imaging camera Approximately 35% more powerful than LE10S The LYNX Pro LE15S is a reliable companion for hunting in a handy and compact housing. With the HIKMICRO LYNX Pro LE15S, you get a very compact thermal imaging camera that can be easily stored in any pocket. The camera features a 256x192 Pixel powerful VOx sensor with a pixel pitch of 12µm and a 720x540 pixel-sized LCOS display. In contrast to its smaller sibling, the LYNX LE10S, the LE15S offers approximately 35% more power due to the larger objective lens. The field of view is approximately 20m at a distance of 100m. With the highly sensitive sensor, heat sources can be detected up to approximately 750m, making the camera ideal for hunting in the forest or field at shorter distances. In addition to pure observation of heat sources, the HIKMICRO LYNX Pro LE15S offers extensive features such as a stadiametric rangefinder or the ability to transmit images and videos via WLAN connection to your mobile device. Recordings can also be conveniently stored on the internal 8GB memory for later transfer via USB-C. All functions and settings (standby, screen brightness, contrast, zoom, color mode, etc.) can be easily operated via four buttons. The built-in rechargeable lithium battery allows continuous operation for up to 8 hours. With WLAN transmission enabled, the operating time is reduced to approximately 6 hours. Technical Data - HIKMICRO LYNX Pro LE15S Detector 256x192 @12μm, VOx Focal Length 15 mm NETD > 35 mK (@25°C,F#=1.1) Aperture F1.0 Spectral Range 8μm ~ 14μm Display 800 x 600 Pixel OLED Shutter Mode Auto, Manual, External Field of View (FOV) 11.69° x 8.78° Field of View at 100m Approx. 20m Frame Rate 25 Hz Detection Range 750m Base Magnification 2.2x (up to 17.6x zoom) Digital Zoom 1x, 2x, 4x, 8x Color Palettes Black Hot (Black=hot) White Hot (White=hot) Red Hot (Red=hot) Fusion Diopter Adjustment Yes Stadiametric Rangefinder Yes Photo Capture Yes Video Capture Yes WLAN / App Yes Battery Life 8 hours Battery Type Internal Li-Ion Battery Internal Memory 8 GB Operating Temperature -20° C / + 55 ° C Interfaces USB-C Protection Class IP67 Weight 280g Dimensions 158.3 x 61 x 57 mm Scope of Delivery Thermal Imaging Device HIKMICRO LYNX Pro LE15S Lens Cover USB Cable Neoprene Storage Bag Quick Start Guide

The Rusan adapter is used to connect a daylight optic to the Hikmicro Thunder TE19C, TH35C, TH35PC, TQ35C, TQ50C thermal imaging attachment. To determine the appropriate diameter for mounting the Rusan adapter, the outer diameter of the optics must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge for this purpose. If you are unsure, please contact our team, specifying your optics (brand, model). Features: Simple mounting due to quick-release lever. Material: Aluminum Color: Black thread: M52x0,75 Scope of delivery: Rusan ARM-52 universal adapter Rusan reducing ring for Hikmicro Thunder

This is an adapter specifically designed for HIKmicro Thunder, Cheetah, and similar devices that use the same connection system. ATTENTION: Not suitable for the new Thunder 2.0 series. The main advantages of using a one-piece adapter are: Easier handling compared to the combination of a reducing ring and M52 adapter More stable construction More affordable - this adapter typically costs less than the M52 adapter plus HIK reducing ring.

HIKMICRO LYNX LC06S (Model 2024) Unbeatably affordable! The new LYNX LC06S convinces at an unbeatable price. Never before has entry into thermal imaging been so cost-efficient. The camera resembles the well-known FLIR Scout TK in form, but is significantly more advanced technologically. The camera features a highly sensitive sensor with 160 x 120 resolution and offers a top-notch image at an extremely fair price. The camera enables use up to the first 0-150m.   NETD < 35 mk (@25° C, F#=1.1) 800x600 Pixel OLED Display Detection range up to 250m Magnification 1-4x (digital) Integrated battery with 10h runtime Wi-Fi transmission Hot-spot detection Type-C interface connector

RUSAN Modular clamp sleeve with clamp Available in various sizes to fit your target optics Special sizes can be ordered on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamp sleeve and a connector to enable precise and repeatable mounting of the attachment device. The RUSAN Modular Adapter's clamp sleeve is clamped onto the daylight optics using a clamp. The clamp sleeve remains permanently on the lens and is available in different sizes. Before ordering, please check the required size carefully by measuring the outside diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The value obtained is precisely the correct size you need. If you are unsure, please provide the type designation of your daylight optics when ordering.

Hikmicro Thunder TH35PC 2.0 Thermal Imaging Attachment The new Thunder 2: Even better than the proven predecessor model. Our price/performance winner! The Thunder 2 offers the following innovations: Heat sensitivity of NETD<20mK, for even clearer images and more detail. Ergonomic focus tower for easier and finer focus adjustment Magnesium alloy body: lightweight, compact and robust Powerful battery pack with up to 10 hours runtime and charging station Now with M52 x 0.75 thread: Fits all universal adapters without reducing ring Recoil-activated video recording Included in the set: Hikmicro Thunder TH35PC 2.0, lens cap, USB-C charging cable / data cable, 2x battery packs, battery station, bag , suitable mounting adapter for the ZF (optional according to selection) Instruction manual, 3 years warranty on the device, 10 years warranty on the sensor. HIKMICRO presents the new TH35PC 2.0 Clip-On. Small, lightweight and with market leading features, Hikmicro sets new imaging standards. Inside is the new 3D DNR VOX sensor with 20mK sensitivity at a resolution of 384x288 pixels and a 35mm lens. Clear and detailed images are available both via viewfinder (in observation mode), in attachment mode via ZF or via WLAN via app connection. The device impresses with a high level of detail and enables a clear response to game with the help of intelligent image algorithms and a sensitivity of only 35mK. The TH35PC 2.0 has a Wi-Fi interface and can be connected to a mobile device via Android or IOS app. This allows you to keep an eye on everything with the mounted clip-on device, even without having to look through the optics all the time. 384x288 Pixel / 50Hz / 35mm 3D DNR Vox sensor 12 μm high grade sensor with 20mK 1280x960 OLED display High detail sharpness and range IP67 protection degree, reliable, rugged 3 years warranty on the device, 10 years sensor warranty. Technical data: Detector: 384 x 288 / 12 μm Frequency: 50 Hz Temperature sensitivity: ≤20mK. Objective lens: 35 mm F=1.0 Screen: 1024 x 768 Pixel Detection : 1800m Recognition : 600m Identification : 300m Field of View: 13m (@100m) Magnification: 3.5 optical, 2x/4x/8x digital) IP protection class: IP67 Connections / Connections: USB-C / WLAN Internal memory: 16GB Battery: Li-Ion battery pack Max. Battery life: 6.5 Hours Size: 186,5 x 68 x 67,4 mm Weight: 538 g

The Rusan adapter is used to connect a daylight optic to a night vision or thermal imaging attachment with M52x0.75 thread. Many attachments are already equipped with the appropriate thread. However, due to the various thread adapters or reducing rings, the Rusan ARM-52 adapter can also be used beyond this and is compatible with almost all common night vision optics. To determine the appropriate diameter for mounting the Rusan adapter, the outer diameter of the optics must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge to do this. If you are unsure, please contact our team stating your optics (brand, model). Features: Simple mounting due to quick-release lever. Material: Aluminum Color: Black Thread: M52x0,75 Compatible with the following devices: InfiRay Mate InfiRay CL42 / CH50 / CH50W Liemke Merlin Liemke Luchs Hikmicro Thunder 2.0 Dedal 540 / 541 / 542 / 546 / 552 Jahnke DJ-8 NSV Lahoux D-545 / LV-81 uvm... By means of thread adapter also compatible with the following devices: Guide/JSA TA435 / TA450 / Nighthog Viper / Lahoux Clip (Reducing ring required ATA435) Hikmicro Thunder TE19C / TH35C / TH35PC / TQ35C / TQ50C (Reducing ring required ARRH1) Dipol (Reducing ring required ADN33) Nitehog TIR-M35 (Reducing ring required ATIR-M35) Pulsar Krypton (Reducing ring required ARRK2) Pulsar Forward F135 / F155 / FN455 (Reducing ring required AF135-F155-FN455) Pulsar Core / DFA75 / DN55 (Reducing ring required ADAF75-V3) Lahoux LV-21 / ATN PS22, Armasight CO-MR/Mini (Reducing ring required APS22) Bering Optics Night Probe (Reducing ring required ABONP) Electrooptic (Reducing ring required ATEO) GT-Nano (Reducing ring required AGTN) uvm.

HIKMICRO Habrok HE25L / HE25LN Thermal Imaging, Night Vision, and Rangefinder - All in One Binocular! Sensor Resolution 256x192 12μm Highly Sensitive Detector NETD < 35 mK 4K Day/Night Vision Sensor 3840x2160 Pixels Built-in and Adjustable 850nm / 940nm IR Illuminator Laser Rangefinder (LRF) up to 1000m Replaceable Battery with 8 Hours Continuous Operation The Hikmicro Habrok 4K HE25L / LN Thermal Imaging Binocular offers high sensitivity thanks to its fast F1.0 lens with 25mm diameter and a <35mk 256 x 182 thermal imaging sensor. The Habrok 4K is multispectral, featuring a 4K day and night sensor with a 60mm focal length and an adjustable IR illuminator. Additionally, the Habrok 4K is equipped with an integrated 1000m LRF system for precise distance measurement. The Compact, Rugged Allrounder The Habrok 4K series is designed in a traditional binocular format, compact and lightweight, packing powerful thermal imaging, night vision, and a 1000m laser rangefinder into an 800-gram unit. The Habrok thermal imaging binocular features a magnesium alloy design with side rubber inserts for added grip and is styled in a compact housing. The objective lens utilizes SDLC coating technology to prevent scratches. With an IP67 waterproof rating, the device can be submerged up to 1 meter deep for 30 minutes, making it perfect for long-term use in demanding environments. Optical Sensor This multispectral binocular features an optical 4K CMOS sensor with a high resolution of 3840x2160 pixels and an extremely high light sensitivity of 0.001 lux. This ensures the Habrok performs well in low-light scenarios, delivering a clear, bright, full-color image even well after sunset in daylight mode, before transitioning to night vision mode with the built-in 850nm or 940nm illuminator, providing a seamless viewing experience in all scenarios. The sensor has a base magnification of 5.5x, digitally zoomable up to 4x, resulting in a maximum magnification of 22x. The day/night vision sensor has a field of view of 12.0x7.2 meters at a distance of 100 meters. Thermal Imaging Sensor In addition to the optical sensor, the Hikmicro Habrok HE25L also features a thermal sensor. This sensor has a resolution of 256x192 pixels and a pixel pitch of 12 µm, resulting in a detailed image. The thermal sensitivity of less than 35 NETD ensures exceptionally clear thermal images, capable of detecting even the smallest temperature differences. The thermal sensor has a minimum magnification of 5.3x and a maximum magnification of 17.2x. The field of view is 12.2x9.3 meters at a distance of 100 meters, and the detection range is 1200 meters, allowing you to observe larger areas effectively. Display The captured images are displayed clearly on the high-quality 1920x1080 pixel OLED display. This display has a refresh rate of 50 Hz, providing a smooth image. This allows you to observe comfortably without missing anything. To further facilitate observation in various lighting conditions, the Hikmicro Habrok multispectral binoculars feature seven different color modes: Optical: Day, Night, Auto Thermal: Black-White, White-Hot, Red-Hot, Fusion Zoom Pro: Enhanced Zoom With HIKMICRO's proprietary image algorithm, finer details can be viewed beyond the limits of digital zoom. Image Pro: Enhanced Image Processing HIKMICRO's proprietary image processing algorithm, Image Pro, enables excellent digital image optimization. The algorithm adapts to various observation purposes and conditions, ensuring high-quality representation of both target objects and background. UHD Night Vision Optical Camera and Built-In Illuminator Featuring a 3840x2160 CMOS sensor with extremely high light sensitivity of 0.001 lux, the Habrok performs well in low-light scenarios, delivering a clear, bright, full-color image even well after sunset in daylight mode, before transitioning to night vision mode with the built-in 850nm or 940nm illuminator, providing a seamless viewing experience in all scenarios. Interchangeable and Rechargeable High-Performance Batteries Enjoy uninterrupted observation with interchangeable and rechargeable 18650 batteries. The device accepts 2x 18650, providing a continuous runtime of over 8 hours, and you can change the batteries in seconds to ensure a practically uninterrupted viewing experience. Additionally, you can connect a regular power bank or USB power via the Type-C interface for external power supply, charging, and continuous use. 1000m Laser Rangefinder Each device in the Habrok series features an impressive 1000m laser rangefinder with an accuracy of +-1m, allowing you to precisely measure the distance to your target. Incline Sensor With intelligent sensors, the Habrok can turn off the screen when the device is tilted, improving battery life. Smart IR and Manual Focus With automatic exposure correction technology, the Habrok can automatically adjust the brightness of the IR illuminator and allow the user to manually focus the light beam to produce the best possible image even in challenging environments while further conserving battery life. Technical Specifications - HIK MICRO Habrok HE25L / LN Detector 256x192 Pixels @12μm, VOx Focal Length 25mm NETD < 35 mK (@25°C, F#=1.0) Display OLED 1920x1080 Pixels (0.49 inches) Aperture F1.0 Minimum Focus Distance 3m Focus Manual Field of View (FOV) 7.0° x 5.3° Field of View at 100m Approx. 12.2 Frame Rate 50Hz Detection Range 1200m Base Magnification 5.3x Digital Zoom 1x, 2x, 4x Color Palettes Black Hot, White Hot, Red Hot, Fusion, Optical, Image Fusion Image Sensor (Optical Module) 3840x2160 Pixels CMOS Sensor Focal Length (Optical Module) 60mm Magnification (Optical Module) 5.5x - 22x Aperture (Optical Module) F1.0 Intelligent IR Illuminator Yes IR Wavelength 850nm / 940nm (Optional) Diopter Adjustment Yes Hotspot Tracking Yes Laser Rangefinder (LRF) Yes up to 1000m Photo Capture Yes Video Recording Yes W-LAN / App Yes Battery Life 8 Hours Battery Type Replaceable 18650 Battery Internal Memory 64GB Interfaces USB-C Protection Class IP67 Weight 800g Dimensions 138.2 x 68.4 x 212.4 mm Package Contents Thermal Imaging Device HIKMICRO Habrok HE25L / LN Charger for 18650 Batteries 4x 18650 Batteries USB-C Cable Protective Case Quick Start Guide Anti-Dust Cloth Neck Strap Tripod Adapter 3 Years Warranty on the Thermal Imaging Device (2 Years Warranty on the Integrated Battery, 10 Years Warranty on the Sensor)

Conversion kit for Rusan modular adapter without quick-release lever (incl. screw and socket) Suitable for modular Rusan adapter clamps MAR-xx Includes new M5 Allen screw and special nut to replace the quick-release Lever.

The Rusan reduction ring is needed to use the universal Rusan quick release adapters also with night vision attachment with M33,5 thread. The reduction ring is screwed into the thread of the Rusand adapter. Compatible with the following devices: Guide TA Series Guide TB Series JSA TA435 JSA TA450 Nitehog Viper Night-Lux TA435 Lahoux Clip and many more devices with M33,5x0,75 thread.

ThermTec Hunt335 Thermal Imaging Attachment The new HUNT series by ThermTEC Look forward to: Thermal sensitivity of NETD<20mK for even clearer images and more details AI range finder for distance measurement Housing made of magnesium alloy: Lightweight, compact, and robust Powerful battery pack with up to 10 hours of runtime and charging station M52 x 0.75 thread: Compatible with all universal adapters without a reducer ring Recoil-activated video recording Customizable user interface ThermTec presents the new HUNT series with innovative thermal imaging attachments featuring the latest sensor technology: Highest image quality A highly sensitive thermal imaging sensor with NETD ≤20mK ensures exceptional clarity and image quality. Every detail comes to life, allowing you to detect subtle differences in thermal signatures and uncover hidden game even in unfavorable conditions. Self-learning image correction Hunt's AI technology imparts self-learning and adaptive properties to the device. Autonomous learning from each image correction can optimize the image correction algorithm and extend image stability in various scenes. Precise focusing The innovative design of the focus button on the top, with a precise focusing mechanism, enables a clear and sharp image at any distance. With minimal movements, the user can focus the lens smoothly while concentrating on the hunting adventure. Light & Compact The Hunt is extremely compact and, at only 400g, one of the lightest attachments on the market. Thanks to the magnesium alloy, the housing is not only lightweight but also very stable. This makes the Hunt the perfect companion for every hunt. Extremely long image stability Thanks to its unique thermal image processing algorithm, Hunt saves the hunter frequent image corrections when aiming. With each correction, the device learns. The data is processed in the background, and after sufficient learning, the image stability is increased. Thus, the image stability remains for up to 1 hour. Remote Control The Ring Bluetooth remote control with ergonomic design allows convenient and direct access to all essential functions. The full range of functions is available, significantly simplifying operation. Technical Specifications - ThermTec Hunt335 Detector 384 x 288 @12μm, VOx Focal Length 35mm NETD ≤20mK Aperture F0.9 Display Resolution / Type 1024 x 768 Pixel (OLED) Display Size 0.39" Field of View (FOV) 7.5° x 5.7° Field of View at 100m approx. 13m Frame Rate 50Hz Optical Magnification 3.3x Detection Range 1,800m Color Palettes White, Black, Red, Green, Violet, Gold Wi-Fi / App Yes Photo Capture Yes Video Recording Yes Remote Control Yes Bluetooth  Yes for Remote Control Battery Life 7 Hours Battery Type Internal Li-Ion Battery Internal Memory 64 GB Operating Temperature -20° C / + 50 ° C Interfaces USB-C Protection Class IP67 Weight 400g Dimensions 125 x 65 x 77 mm

The lock nut fits all attachments and adapters with an M52 external thread and is used to secure connectors and adapters with a missing or insufficient lock ring. Thanks to the cut-outs, the lock nut can be fastened/loosened with a hook wrench (not included).

RUSAN Eyepiece for MAR Connector With this eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device. The rubberized eyepiece has no magnification.