AMR Thermo Vision Target Pads for Shooting Thermal Imaging Devices With the AMR thermal imaging target pads, this calibration is particularly efficient and cost-effective. Simply tear open the packaging (foil), remove the pad, peel off the protective foil on the back and attach the target pad to the desired location. The pad reaches its optimum calibration temperature of 38°C within a few minutes. Then target the thermal pad with the thermal imaging camera mounted on the firearm and optimize the thermal view. After 2-3 test shots, unintentional shot deviations between bullet holes and geometric center of the pad can be optimally determined thanks to the round shape and small diameter of the pad. To calibrate weapons with thermal imaging attachment 10 pads per pack Diameter approx. 4 cm Quick heating by activated carbon to 38°C Note: The thermal imaging target pads are sold without the box shown.

Battery for thermal imaging attachments with up to 7 hours runtime. Suitable for battery extension InfiRay Xeye CL42 and CH50.

NiteCore Lithium Ion battery type 16340 with 3.7V and 650mAh. With protection circuit (PCB / IC Protection) against short circuit, overcharge and deep discharge. Made from a DLG cell. Technical Data: Length (mm): 35 Diameter (mm): 16 Voltage: 3,7 Capacity (mAh): 650

LIEMKE Loden bag for thermal imaging devices Made from 100% mountain loden made of pure new wool Made in Germany by Waldkauz Inner dimensions: 18 x 7 x 7 cm For the safe storage and protection of your high-quality thermal imaging camera. This practical rectangular bag is perfect for safely storing your thermal imaging camera during hunting. Thanks to the gentle lining, lint is prevented from settling on the valuable optics. The bag also has a sturdy belt loop on the back so you can have quick and secure access to your thermal imaging camera. The bag also offers space for additional accessories such as cameras, smartphones, monoculars, flashlights, silencers, driven hunt optics, tools, rescue straps, and much more. This bag offers you flexible use that will convince you. The loden bag has a zipper that is covered with leather. The lining protects the optics from lint and ensures that it remains undamaged. The outer material is made of 100% mountain loden made of pure new wool. The loden bag is suitable for a variety of LIEMKE optics such as KEILER, MERLIN, DACHS, CHALLENGER, SPERBER, but also for all thermal imaging and night vision devices from other manufacturers. The inner dimensions (H x W x D), which also represent the maximum dimensions of the stored equipment, are 18 x 7 x 7 cm (for cylindrical shape: diameter approx. 7 cm).  

Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.    

The Nitecore SC2 is a fast charger that works with up to 3A charging current. The charging current (0.5A, 1A, 2A or 3A) is manually preselectable per charging slot. However, the SC2 also selects the charging current automatically, depending on the battery capacity. The charging process, battery status and charging current are visualized by LEDs. The SC2 is also able to reactivate deeply discharged IMR batteries. Another feature is the additional USB port, which can charge USB devices with up to 2.1A. The charging process, battery status and charging current are visualized by LEDs. The SC2 is also able to reactivate deeply discharged IMR batteries. Another feature is the additional USB port, which can charge USB devices with up to 2.1A. Suitable for: 10340, 10350, 10440, 10500, 12340, 12500, Li-Ionen / IMR / 12650, 13450, 13500, 13650, 14350, 14430, LiFePO4 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650 Ni-MH (NiCd): AA, AAA, AAAA, C, D   Technical Data: Length (mm): 155 Width (mm): 80 Height/Depth (mm): 44 Total Weight (g): 263 Input voltage: AC 100-240V 50/60Hz 0.9A(MAX) 30W / DC 12V 2.5A Output voltage: Battery: 4.35V±1% / 4.2V ±1% / 3.7V ±1% / 1.48V ±1% / USB: 5V 2.1A Charging current (A): 3A+2A MAX Material: Plastic

Li-Ion battery with protection circuit (PCM/IC-Protection) against short circuit, overcharge and deep discharge specifically for high-performance LED flashlights. Suitable for the Hikmicro thermal imaging devices Technical data: Cell size: 18650 System: Li-Ion Voltage: 3.7 volts mAh: 3350 mAh VPE: Tray Connection system: PCB (PCM with protection) Cardboard jacket covering: shrink tubing Cell type: Consumer Protection functions: 6A PCM protection circuit Energy: 12.5 Wh Height (net): 69 mm Diameter (net): 18 mm Gross weight: 60 g max. Charge current: 1 C max. Discharge current: 2 C Dangerous goods class: UN3480 Dangerous goods class: SV188 ADR EAN number: 4042883402119

Matching eyepiece adapter with diopter adjustment for Hikmicro Thunder TE19C / TH35C / TH35PC / TQ35C / TQ50C. With the aid of the viewfinder, you can now use your thermal imaging attachment optimally as an observation device in no time at all without connecting it to an optical system. The eyepiece has a diopter adjustment for eyeglass wearers.

RUSAN Eyepiece for MAR Connector With this eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device. The rubberized eyepiece has no magnification.

The quick focus lever allows for quick adjustment of the focus on the Hikmicro Thunder TE19C, TH35C, TQ35, and similar thermal imaging attachments. The lever ring is precisely matched to the ring on the attachment and can only be fastened when positioned accurately. The quick focus lever is slid onto the focus ring at the very back when mounting. The quick focus lever is available in night black and signal orange Colors.

RUSAN 2.5x Magnification Eyepiece for MAR Connector With this 2.5x magnification eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device.

Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.    

The NEW i2 is the successor model of the well-known i2EU. The NEW i2 from Nitecore has the following additional features: 100% faster charging Active Charge Distribution (ACD) Advanced support for 3.7V and 4.35V batteries IMR battery reactivation Automatic charging current selection according to battery capacity Automatic detection of batteries that are no longer rechargeable The Nitecore NEW i2 can work with max. 1A charging current. This can be preselected manually per charging slot. The charging process and charging current and battery status are visualised by LEDs. The active charging current distribution enables a dynamic distribution of the charging power. If, for example, two batteries are being charged and one of them is fully charged, the total charging power is calculated for the other charging slot. Suitable for: Li-Ionen / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500,12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, Flat Top, 22500, 22650, 25500, 26500, 26650 Ni-MH (NiCd): AA, AAA, AAAA, C, D Technical Data: Length(mm): 132 Width (mm): 70 Height (mm): 35 Weight (g): 126 Charge current: 2x 500 mA / 1x 1000 mA Material: Plastic

Precise hunting torque wrench Torque wrench with 1nm and 2.5mm hex bit for mounting the Precision Hunting ferrule on your daylight optics.

Hikmicro Eyepiece für Thunder 2.0 Serie Maße: 57.1 mm x 57.1 mm x 42.3 mm Gewicht: 97.7 g Gewinde: M52x0.75 Geeignet für: HIKMICRO Thunder 2.0 Dioptrien: -5 bis +5

LIEMKE Strap Comfortable and Quiet Strap Suitable for all LIEMKE models and devices with 1 1/4" tripod thread The new LIEMKE straps impress with their subtle design and maximum comfort. Thanks to the two length-adjustable loops, the shoulder strap can be individually adjusted to your needs. The loops are supplied in two different versions for handheld and clip-on devices. This means that the lightweight and secure LIEMKE strap fits all common handheld and clip-on devices from LIEMKE, including the LUCHS 1, as well as all thermal imaging and night vision devices with 1 1/4" tripod thread. Thanks to the Velcro solution at the eyepiece, you can easily and securely attach your device vertically to the strap. The LIEMKE strap is therefore a perfect solution for comfortably and securely transporting your handheld or clip-on devices.  

RUSAN 3x Magnification Eyepiece for MAR Connector With this 3x magnification eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device.

Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.    

LIEMKE Carry Case / Protective Case Suitable for KEILER / MERLIN-35/-42/CHALLENGER-35 and Luchs-1 models. Dimensions inside: 20 cm x 8 cm x 8 cm (L x W x H) For safe storage and protection of your high-quality thermal imaging device This protective case is specifically designed for the KEILER, MERLIN-35/-42, CHALLENGER-35, and Luchs-1 models, providing perfect protection for your equipment. The case is made of robust CORDURA material (Invista® 1000D Cordura® with double PU coating) and features MOLLE carrying loops. The color of the case is black. The inside dimensions are L x W x H: 20 cm x 8 cm x 8 cm, making it the perfect fit for your equipment and ensuring safe storage.

  The Nitecore UMS4 is a smart, QC 2.0 compatible USB charger with four charging bays and LCD display. The UMS4 can charge Li-Ion, Li-Ion IMR, NiMH/NiCd and LiFePO4 batteries. The Nitecore UMS4 charger detects the battery type, determines the battery condition, the charge level of the battery and automatically determines the correct charging method. The default charging current is 1000mA. However, this can be manually increased up to 2A depending on the battery type, and up to 3A in QC mode. Maximum charging current with one occupied slot: 3A, with 4 occupied slots 1A per slot. Deep discharged Li-Ion batteries can be reactivated in the UMS4 (please refer to the user manual). Features: QC Mode: 3,000mA*1 (MAX) 2,000mA*2 (MAX) 1,000mA*4 (MAX) Standard Mode: 2,000mA*1 (MAX) 1,000mA*2 (MAX) 500mA*4 (MAX) Compatible with the following battery types: Li-Ion, IMR, LiFePO4: 10440, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 25500, 26500, 26650, 26700 Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D Technical Data: Lenght (mm): 159 Width (mm): 107 Heigth/Depth (mm): 41 Total Weigth (g): 256 Input voltage: DC 5V/2A 12V/1.5A Output voltage: 4.35V±1% / 4.2V±1% / 3.7V±1% / 1.48V±1% Charging current (A): QC: 3A*1, 2A*2, 1A*4 / Standard: 2A*1, 1A*2, 0,5A*4 Material: Plastic

Nitecore Universal Mount BM03 Easy and quick installation without tools Upper part detachable via partition For mounting cylindrical objects up to 27mm diameter (such as the Nitecore Powerbank NPB1 or flashlights) on cylindrical objects up to 35mm Diameter.

Präzise Jagen Kontrast-Booster Grün Unser Kontrast-Booster in Grün, reduziert das oftmals zu helle Bild der Wärmebildgeräte und wirkt zudem Kontrastverstärkend. Der Booster wird einfach in den am Gerät montierten Duoverbinder gesteckt und kann jederzeit schnell und bequem wieder demontiert werden.    

Akku passend für die Hikmicro Thunder 2.0 Serie. Kapazität: 4.400 mAh Spannung: 3,6 V Ladespannung: 1,32 A Entladespannung: <1 A

LIEMKE Battery Pack BP-K Replacement Battery The BP-K Li-Ion battery with bayonet closure is a practical additional battery for the KEILER-1 that increases the runtime of the device when a charging station is not available. With the easy-to-use bayonet closure, the battery can be quickly and easily replaced. This way, you can ensure that your KEILER-1 is always ready for use.