Präzise Jagen
Filter
Filter
–
Filter
–
%
Präzise Jagen Telefix Duo-Connector
Precise Hunting Duo Connector For absolutely repeatable mounting on the scope. Select the desired size according to the connection thread of your attachment The Duo-Connector has five locking lugs with which it can be easily, quickly and, above all, absolutely repeatably connected to all Präzise Jagen clamping sleeves. In order to screw the Duo connector firmly to the attachment, the connector has an internal thread in various selectable sizes. The Duo connector is made of high-quality aluminium in one piece and has an anodised surface that protects against corrosion. Select the correct internal thread to suit your attachment: for HIKMICRO Thunder TE19C, TH35C, TH35PC and TQ50C you need the Duo connector M52x0.75 mm and the HIKMICRO adapter ring. for InfiRay CL42, CH50, CML25 / Liemke Merlin 25, Merlin 35, Merlin 42 you need the Duo connector M52x0.75 mm for Guide/JSA TA435, TA450 you need the Duo connector M33,5x0,75 mm for Pulsar Proton XQ30 and Pulsar Krypton XG50 you need the Duo-Connector M35x1 mm
€89.00*
%
Präzise Jagen Telefix Multi-Adapter Clamping
Precise hunting ferrule For absolutely repeatable mounting on the scope. Select the desired size according to your external lens diameter This clamping sleeve is part of the absolutely bulletproof and repeatable Precise Hunting Multi-Adapter. In order to achieve a repeatable connection between the riflescope and the attachment, the clamping sleeve is screwed tightly onto the objective over a length of 45mm and by means of 4 screws. The clamping sleeve remains permanently on your daylight optics to meet the highest precision requirements. The clamping sleeve is made of high-quality aluminum in one piece and is protected against corrosion by an anodized surface. The inside of the clamping sleeve is covered with a protective film that protects your optics from scratches and increases adhesion. The exact alignment of the clamping sleeve to the attachment is achieved with a special inner contour. On the front side is a serration - the basis for fast and repeatable mounting of the attachment by means of the Duo-Connector. The counterpart, the Duo connector, is firmly and permanently screwed onto the attachment. The Duo connector has five locking lugs with which both parts can be connected easily, quickly and, above all, with absolute repeat accuracy. With the Duo Connector, you can easily use the attachment on different riflescopes. To determine the appropriate diameter for mounting the clamping sleeve, the outer diameter of the optic must be measured. Ideally, use a caliper gauge for this Purpose.
€179.00*
Precise chase dust plug for duo connector
Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.
€39.00*
Precise chasing torque wrench 1nm with bit
Precise hunting torque wrench Torque wrench with 1nm and 2.5mm hex bit for mounting the Precision Hunting ferrule on your daylight optics.
€42.90*
Precise chase dust plug for duo connector
Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.
€49.00*
Präzise Jagen 3x eyepiece for Duo Connector
Observation eyepiece for the Duo Connector by Präzise Jagen. Eyepiece with triple magnification: The eyepiece is directly attached to the Duo Connector via an interface. The optical axis is pre-adjusted in the delivery state. If necessary, it can be adjusted at any time using adjustment screws. With the eyepiece, you can now use your thermal imaging attachment with Präzise Jagen adapter as an observation device without connecting it to an optic in no time.
€199.00*
Precise chase dust plug for duo connector
Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.
€59.00*
Präzise Jagen Telefix Duo-Connector
Precise Hunting Duo Connector For absolutely repeatable mounting on the scope. Select the desired size according to the connection thread of your attachment The Duo-Connector has five locking lugs with which it can be easily, quickly and, above all, absolutely repeatably connected to all Präzise Jagen clamping sleeves. In order to screw the Duo connector firmly to the attachment, the connector has an internal thread in various selectable sizes. The Duo connector is made of high-quality aluminium in one piece and has an anodised surface that protects against corrosion. Select the correct internal thread to suit your attachment: for HIKMICRO Thunder TE19C, TH35C, TH35PC and TQ50C you need the Duo connector M52x0.75 mm and the HIKMICRO adapter ring. for InfiRay CL42, CH50, CML25 / Liemke Merlin 25, Merlin 35, Merlin 42 you need the Duo connector M52x0.75 mm for Guide/JSA TA435, TA450 you need the Duo connector M33,5x0,75 mm for Pulsar Proton XQ30 and Pulsar Krypton XG50 you need the Duo-Connector M35x1 mm
€79.00*
Precise hunting color filter / contrast booster green
Precise hunting color filter / contrast booster green Our contrast booster in green reduces the often too bright image of thermal imaging devices and also has a contrast-enhancing effect. The booster is simply inserted into the duo connector mounted on the device and can be quickly and easily removed again at any time.
€39.00*
Precise hunting Telefix adapter ring for HIKMICRO
Precise hunting adapter ring for HIKMCRO Suitable for HIKMICRO Thunder TE19C, TH35C, TH35PC, TQ50C The HIKMICRO thermal imaging attachments have a bayonet with union nut to accommodate the adapter. The adapter ring is inserted into the bayonet and screwed tightly with the union nut. On the opposite side there is an M52x0.75 external thread for fastening the M52 Duo connector. To attach the attachment, you need a Duo connector with an M52x0.75 mm thread in addition to the connector.
€39.00*
Precise chase dust plug for duo connector
Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.
€49.00*
Precise chase dust plug for duo connector
Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.
€59.00*
Präzise Jagen Telefix Duo-Connector
Precise Hunting Duo Connector For absolutely repeatable mounting on the scope. Select the desired size according to the connection thread of your attachment The Duo-Connector has five locking lugs with which it can be easily, quickly and, above all, absolutely repeatably connected to all Präzise Jagen clamping sleeves. In order to screw the Duo connector firmly to the attachment, the connector has an internal thread in various selectable sizes. The Duo connector is made of high-quality aluminium in one piece and has an anodised surface that protects against corrosion. Select the correct internal thread to suit your attachment: for HIKMICRO Thunder TE19C, TH35C, TH35PC and TQ50C you need the Duo connector M52x0.75 mm and the HIKMICRO adapter ring. for InfiRay CL42, CH50, CML25 / Liemke Merlin 25, Merlin 35, Merlin 42 you need the Duo connector M52x0.75 mm for Guide/JSA TA435, TA450 you need the Duo connector M33,5x0,75 mm for Pulsar Proton XQ30 and Pulsar Krypton XG50 you need the Duo-Connector M35x1 mm
€89.00*
Präzise Jagen Telefix Duo-Connector
Precise Hunting Duo Connector For absolutely repeatable mounting on the scope. Select the desired size according to the connection thread of your attachment The Duo-Connector has five locking lugs with which it can be easily, quickly and, above all, absolutely repeatably connected to all Präzise Jagen clamping sleeves. In order to screw the Duo connector firmly to the attachment, the connector has an internal thread in various selectable sizes. The Duo connector is made of high-quality aluminium in one piece and has an anodised surface that protects against corrosion. Select the correct internal thread to suit your attachment: for HIKMICRO Thunder TE19C, TH35C, TH35PC and TQ50C you need the Duo connector M52x0.75 mm and the HIKMICRO adapter ring. for InfiRay CL42, CH50, CML25 / Liemke Merlin 25, Merlin 35, Merlin 42 you need the Duo connector M52x0.75 mm for Guide/JSA TA435, TA450 you need the Duo connector M33,5x0,75 mm for Pulsar Proton XQ30 and Pulsar Krypton XG50 you need the Duo-Connector M35x1 mm
€89.00*