Brunox LUB&COR 100ml
- High-Tech Lubrication & Corrosion Protection Specifically for Long-Term Preservation
Discover BRUNOX LUB&COR, a high-quality long-term corrosion protection product specially developed for metallic structures and machinery.
- High-quality, highly resilient lubricant
- Free from silicone, PTFE, graphite, nano-ceramic particles. No resinification!
- No washing out – "all-weather resistant"
- Guaranteed lubrication effectiveness down to -41 °C
- Strong adhesive corrosion protection
- Indoor storage – corrosion protection for up to 3 years
Functionality:
Brunox LUB&COR is characterized by the formation of a uniform, non-drying corrosion protection film that penetrates even hard-to-reach corners and edges. This ensures effective long-term corrosion protection. At the same time, Brunox LUB&COR serves as a weather-resistant and resilient lubricant of the highest quality, resistant to acidic atmospheres and other environmental influences.
Application Area:
Ideal for long-term corrosion protection of metallic structures and machinery during storage and transportation in enclosed environments (up to 3 years), in covered outdoor areas (up to 1 year), and in open outdoor areas (up to 5 months).
Application:
Brunox LUB&COR is thixotropic and should be thoroughly shaken before use. Apply it evenly to the dry surface, optionally with a brush, airless, or compressed air gun. The recommended layer thickness is approximately 5 - 20 μm, meaning that one liter can treat 20 – 40 m2 of surface. After protection, Brunox LUB&COR can be removed with a cleaning agent, such as anionic surfactants. If the surface is slightly damp, pre-treatment with Brunox Gun Care Spray is recommended. Spray it into all crevices and corners to displace moisture, let water bead off, and wipe off the Brunox Gun Care Spray layer with a cloth before applying Brunox LUB&COR.
Contents:
- 100 ml Brunox LUB&COR
Product Safety:
Warnings:
!!! Danger !!!
Please note that this product is flammable and classified as an inflammable aerosol. The container is under pressure and can burst when heated. In case of medical need, keep the label at hand. It must not get into the hands of children and must be protected from heat, hot surfaces, sparks, open flames, and other ignition sources. The spray should not be sprayed near open flames or other ignition sources and should not be pierced or burned, even after use. Exposure to direct sunlight should be avoided, and the product should not be exposed to temperatures above 50 °C. Repeated skin contact may lead to dry skin.
0 of 0 reviews