Quick-release screw made of anodized T25 steel for the PARD Uni-Adapter Suitable for PARD NV007, NV007A, NV007S & SYTONG HT-66 The screws are suitable for all Pard Uni-Adapters in all sizes. Advantages of the quick-release screw: The Allen screws of the aluminum adapter are unnecessary. Simply turn out the original screws from your PARD adapter and replace them with a single quick-release screw. With the quick-release screw, you can now close or open the PARD Uni-Adapter within seconds, without handling the original Allen screws of the adapter. Technical data: • Material - T25 anodized steel • Screw length 3.5 cm Attention: The adapter shown in this offer is not included in the scope of delivery. If you also need the adapter, you will find a suitable set in our shop.

PARD NV007SP Night Vision Add-on Device New version: Generation 4 with laser rangefinder. German version (no laser and no reticle included!) Extremely sensitive CMOS sensor with a resolution of 2560x1440 pixels Optionally with laser rangefinder (measurement distance up to 1,000m) Direction-adjustable IR illuminator with a range of up to 350m Bright OLED display with a resolution of 1024x768 pixels Up to 8 hours of battery life Waterproof to IP67 Complete set with PARD NV007SP, ocular clamp adapter (45mm with reducing sleeves), 1x 18650 Li-ion battery, protective case, USB data/charging cable, German manual Attention: The adapters of the previous models PARD NV007 and NV007A are not compatible! The PARD NV007SP is the successor to the NV007S and thus the 4th generation of the well-known PARD NV007 series. The compact digital night vision device is ideal for observing wildlife, even in complete darkness. Using the included ocular adapter, the PARD NV007SP can be mounted on various optics, allowing a daylight scope to be quickly and easily converted into a modern night vision device. The NV007SP, in the LRF variant, has a 1,000m laser rangefinder for quick determination of distances. In addition, the new generation features an extremely sensitive CMOS sensor with a resolution of 2560x1440 pixels, allowing the user to see even the finest details in the dark. Other highlights of the device include a 1024x768 OLED display, a Full-HD sensor that supports 1080P video recording and takes photos with 2592x1944 pixels, a direction-adjustable IR light and a battery life of 8 hours, which can be extended via the USB-C port. Since it is an add-on device, the PARD NV007SP does not have a built-in sight and should be used in combination with a day-time sight. The German version doesn't have laser and sight included, it only support as a add-on device The LRF version of the NV007SP has a 1,000m laser rangefinder for quickly determining distances. In addition, the new generation has an extremely sensitive CMOS sensor with a resolution of 2560x1440 pixels, which enables the user to see even the finest details in the dark. Other highlights of the device include a 1024x768 OLED display, a full HD sensor that supports 1080P video recording and captures photos at 2592x1944 pixels, a direction-adjustable IR light and an 8-hour battery life that can be extended via the USB-C port. Since it is a post-mount device, it does not have to be shot in or calibrated - in contrast to most digital post-mount devices. Even if the device is placed slightly off-centre, there will be no deviation in the point of impact, as the optical axis is not changed. Thanks to the built-in focusable IR illuminator, the device provides a clear image even in complete darkness, up to approximately 350m (assuming good weather conditions). Digital Clip-On night vision device The new 2K-CMOS sensor allows for razor-sharp night vision. optimized German version (German menu guidance & manual!) Day and night vision capability up to 350 meters in the darkness 22.5mm lens (4 - 14x zoom on the daylight scope possible!) OLED display! Resolution 1024x768px Integrated, focusable, and direction-adjustable IR illuminator photo and video recording possible, resolution 2592x1944 (photo) / 1920x1080 (video) Live image transmission via WiFi interface / app to your mobile device possible no precision losses, solely the alignment of the sight with your target is decisive for the hit point location Note: For a clear and sharp image even at long distances in combination with your scope, the device must be optimally adjusted. The following procedure has proven to be effective: 1. Set the diopter adjustment of your scope to 0 2. Open the PARD menu and use the diopter adjustment ring on the PARD to sharpen the menu text 3. Now mount the PARD on the eyepiece of your scope 4. Now adjust the sight of your scope using the focusing knob, located on the side of the PARD 5. If your scope has a parallax adjustment, focusing can be done through the parallax adjustment at varying magnification. 6. For greater distances, the IR illuminator can be adjusted by simply turning the focus knob on the top of the PARD.  

O-Ring rubber set for PARD bayonet mount. The package of the O-ring set includes: 1 piece of black rubber O-ring with thickness of 1.2 mm 1 piece of red rubber O-ring with thickness of 1.1 mm

Made of rubber, 0.5, 1, 1.5, 2, 2.5, 3 mm thick.

Cap for shaft extension and recoil attenuation Universal rubber slip-on butt pad to extend the stock and reduce recoil. The universal pad is compatible with most commercially available stocks. A practical solution for stock extension (by approx. 21mm) and recoil reduction. Particularly when using add-on night vision devices, the distance between the eye and ocular can be easily increased with the help of the stock extension. Thanks to an anti-slip inner coating, no screwing or drilling is necessary. The butt pad can be quickly and easily put on and taken off. Significantly reduces recoil when firing Made from high-quality, highly elastic natural rubber, with proven shock absorption Easily fits on and off most wood and plastic stocks.

PARD Standard UNI-Adapter Available in Ø 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Suitable for: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 ALU adapter suitable for mounting the PARD NV007 / NV007A / NV007V and SYTONG HT-66 / HT-77 / HT-770 / HT-88 onto a corresponding riflescope. The standard adapter for the PARD night vision device is available in sizes 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm. Select the size that corresponds to the outer diameter of your eyepiece. Intermediate sizes can be compensated for with the separately available rubber adapter ring set (item no.: WA-1203), so that the adapter can be mounted securely. Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

PARD NV007S / SP Standard Adapter Quick Release Screw Available in Ø 45 mm and 48 mm with reducing sleeves Available in Ø 40.3 mm and 42 mm without reducing sleeves Suitable for: PARD NV007S / SP Aluminum adapter suitable for tool-free mounting of the PARD NV007S / SP onto a corresponding rifle scope with a quick release screw. Mount the PARD onto your optic quickly and easily with the quick release screw, without any tools needed. The new standard adapter for the PARD NV007S / SP night vision device is available in sizes 45mm and 48mm with three different sized reducing sleeves. The included reducing rings come in sizes: 2.35mm, 1.5mm, and 0.8mm. ATTENTION: The reducing rings are only included with the 45mm and 48mm adapters. Choose the size that corresponds to the outer diameter of your eyepiece. The 45mm adapter can be reduced to fit an eyepiece diameter of up to approximately 37mm. Please note that this adapter is not compatible with the previous versions of PARD (NV007/A).

PARD NV007S / SP Standard Adapter (with reducer sleeves) Available in Ø 45mm and 48mm with reducer sleeves Available in Ø 40.3mm and 42mm without reducer sleeves Compatible with: PARD NV007S / SP ALU adapter suitable for mounting the PARD NV007S / SP onto a corresponding rifle scope. The new standard adapter for the PARD NV007S / SP night vision device is available in sizes 45mm and 48mm with three differently sized reducer sleeves included. The included reducer rings come in sizes: 2.35mm, 1.5mm, and 0.8mm. NOTE: The reducer rings are only included with the 45mm and 48mm adapters. Choose the size according to the outer diameter of your eyepiece. The 45mm adapter can be reduced to fit eyepieces with a diameter of up to approximately 37mm. Please note that this adapter is not compatible with the previous versions of PARD (NV007/A).

PARD Universal-Adapter for all riflescopes with Ø 36.0-47.0mm eyepiece diameter Compatible with: PARD NV007S / SP Easy and fast installation and removal with just a few steps Using the PARD Universal Adapter, the compensation between the rifle scope eyepiece and adapter can be easily and uncomplicatedly made through three different-sized PVC adapter distance rings. Therefore, no more compensation with rubber rings or tape is necessary. Only with riflescopes under Ø 36.0mm, additional tape is needed to compensate, in addition to the PVC rings. Assembly Instructions: Loosen the fixing ring from the adapter and place it on the eyepiece of your rifle scope. Now, using the appropriate PVC distance ring, adjust the distance between the eyepiece and the adapter. Next, place the main part of the adapter onto your rifle scope eyepiece and screw it in with the fixing ring. Included: PARD NV007S / SP Universal Adapter with bayonet lock 3 PVC distance rings Fixing ring Note: The PARD Universal Adapter is not suitable for Blaser R93/R8 rifles, as the locking of the adapter ring is blocked during the repeating process.

Reliably protects the Pard NV007 A/V/S lens from dust, moisture, and scratches. With a bayonet lock Quick assembly / disassembly Perfect fit for all Pard models

The FD1 is an innovative 3-in-1 digital night vision device from PARD that can be easily attached to any scope, transforming it into a high-quality night vision system. Equipped with a highly sensitive 1920x1080 CMOS sensor, it delivers sharp and clear images even in low-light conditions. Additionally, the device can be used as a handheld monocular or a mounted scope. In combination with a 1000m LRF module, it enables precise distance measurements for accurate ballistic calculations and accurate shots. With an impressive shock resistance of 6000 J and an IP67 protection rating, it is designed for durability and reliable performance. A universal adapter with 63mm and reducing sleeves is included. We recommend using a Rusan MAR adapter in the required size and a Rusan MCR connector FD1/FT32. Main Features Very compact design Lightweight at 375 g High-resolution image thanks to the CMOS sensor Scope of Delivery Quick-Start Guide Warranty Card USB-C Charging Cable 1 pc 18650 Battery Cloth Bag Rubber Sealing Rings Universal Adapter QD-63 Eyecup Allen Key Specifications Sensor Type: CMOS Resolution (px): 1920*1080 Pixel Size (µm): 2.9 Frame Rate(Hz) Color: 60 / B&W: 30 Image Engine: PARD VLEA Lens(mm): 30 Optical Magnification(x): 1 Field of View Horizontal: 7.9 Display Type: OLED Resolution (px): 1440*1080 Image Mode: Color / Mono Photo Resolution (px): 2592*1944 Photo Format: JPG Video Resolution(px): TBD Video Format: mp4 Storage: TF card (128 GB max) PIP: Monocular: Yes / Clip-On: No Auto Recording: Yes Loop Recording: Yes Microphone: Yes IR Illumination: 3 levels USB Type-C: Yes WiFi: Yes Supported Apps: PardVision Battery Type: Lithium-ion 18650 Output Voltage (V): 3.7 Operating Time(h): ≤8 External Power Supply: Type-C Protection Rating: IP67 Operating Temperature: -4F~122F/-20C~50C Shock Resistance (J): 6000 Housing Material: Aluminum Alloy IR Wavelength: 850nm or 940nm

PARD Universal Adapter For all scopes with Ø 35.2 - 47.0mm ocular diameter Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Easy and fast mounting and dismounting with just a few moves With the PARD Universal Adapter, the compensation between scope ocular and adapter can be easily and conveniently adjusted by using two different sized PVC adapter spacers. Therefore, no compensation with rubber rings or adhesive tape is necessary anymore. Mounting instructions: Loosen the fixing ring from the adapter and place it on the ocular of your scope. Now, adjust the distance between the ocular and the adapter with the appropriate PVC spacer. Then, place the main part of the adapter on the ocular of your scope and screw it together with the fixing ring. Mounting note: For ocular diameters under/between 35.2mm Ø and 39.0mm Ø, use the small/medium-sized PVC spacer, and for all other scopes between 39.0mm Ø - 47.0mm Ø, only use the thick PVC spacer. Package includes: PARD Universal Adapter with bayonet lock 3 pieces of PVC spacer Fixing ring Note: The PARD Universal Adapter is not suitable for Blaser R93/R8 rifles, as the closing mechanism of the adapter ring blocks during the repeating process.

PARD Quick Release Adapter Available in Ø 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super-fast and tool-free installation Mount and dismount your PARD onto your optic in seconds without any tools, using the Quick Release Adapter. Choose the size that matches the outside diameter of your ocular lens. Intermediate sizes can be compensated for with the separately available rubber adapter ring set (Article No.: WA-1203) for a wobble-free mount. Features Quick-Release Lever Bajonett Connector for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Suitable for almost all rifle scopes Material: Duraluminium

PARD NV007S / SP Quick Release Adapter for Zeiss Conquest DL Only suitable for older Conquest models (for the current Conquest V4/V6, you can use the normal quick release adapter) Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD onto your Swarovski optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Zeiss Conquest DL Material: Duraluminium Product image may vary!    

PARD Quick Release Adapter for Swarovski Z6i V1 / Zeiss Duralyt Fits Swarovski Z6i Gen. 1 / Zeiss Duralyt Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD or SYTONG onto your Swarovski or Zeiss optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Swarovski Z6i Gen. 1 / Zeiss Duralyt Material: Duraluminium Product image may vary!

PARD NV007S / SP Quick Release Adapter Available in Ø 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Suitable for: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD to your optic in seconds with the quick release adapter without any tools. Choose the size according to the outside diameter of your ocular. Intermediate sizes can be compensated for with the separately available rubber adapter ring set (item no.: WA-1203), so that the adapter can be mounted without any wobbling. Features Quick-release Lever Bayonet lock for attaching the PARD NV007S / SP Suitable for almost all scopes Material: Duraluminium  

PARD quick release adapter for Zeiss Conquest DL Only compatible with older Conquest models (for the current Conquest V4/V6, you can use the regular quick release adapter) Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super fast and tool-free installation Mount and dismount your PARD onto your Zeiss Conquest DL in seconds with the quick release adapter, without any tools needed. Features Rolling locking Lever Bayonet mount for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Compatible with Zeiss Conquest DL Material: Duraluminium Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

SYTONG / PARD quick release adapter for Zeiss V8 / Leica Magnus Gen. 1 Only compatible with Leica Magnus Gen. 1 scopes Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super fast and tool-free installation Mount and dismount your PARD onto your Leica (Gen.1) or Zeiss optic in seconds with the quick release adapter, without any tools needed. Features Rolling locking lever Bayonet mount for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Compatible with Zeiss V8 / Leica Magnus (Gen. 1 only) Material: Duraluminium Note: For Leica Magnus Gen. 2, currently only adapters from Rusan are compatible. Please call us if you are unsure which adapter is needed. Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

PARD Quick Release Adapter for Swarovski Z6i V2 Only suitable for Swarovski Z6i Gen. 2 Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD onto your Swarovski optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Swarovski Z6i Gen. 2 Material: Duraluminium Product image may vary!

PARD quick-release adapter for Swarovski Z6i V2 Compatible only with Swarovski Z6i Gen. 2 Suitable for: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super-fast and tool-free installation Mount and dismount your PARD onto your Swarovski optics in seconds with the quick-release adapter, without the need for any tools. Features: Roller lock Lever Bayonet lock for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 attachment Suitable for Swarovski Z6i Gen. 2 Material: Duraluminium Please note that this adapter is not compatible with the new PARD successor, NV007S / SP.

PARD Quick Release Adapter for Zeiss V8 / Leica Magnus Gen. 1 Only fits Leica Magnus Gen. 1 scopes Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD onto your Leica (Gen. 1) or Zeiss optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Zeiss V8 / Leica Magnus (Gen. 1 only) aterial: Duraluminium Note: Currently, only RUSAN adapters are suitable for Leica Magnus Gen. 2. Please call us if you are unsure which adapter is needed. Product image may vary!

Pard Predator 480 LRF Thermal Imaging Attachment Precise versatility with outstanding performance (day and night) and easy mounting Look forward to: Compact design: Lightweight and handy, perfect for mobile use. Highest sensitivity: With a NETD value of ≤ 20 mK, it detects even the smallest temperature differences. Rangefinder: Precise measurements up to 1000 m Reliable in all conditions: Dustproof and waterproof thanks to IP67 protection class, ideal even in extreme weather conditions. Recoil resistance up to 6000 J - reliable use even with powerful calibers. The PARD Predator 640/480 thermal imaging attachment is the ideal choice for hunters and nature observers who value precision and versatility. This compact thermal imaging device offers quick and easy mounting thanks to the special mounting adapter and impresses with its outstanding performance day and night. seamlessly from a pocket-sized monocular to a thermal imaging attachment Technical Specifications: The PARD Predator is available in two models: one with a 35 mm lens and a resolution of 480x360 pixels, and a model with a 45 mm lens and a resolution of 640x512 pixels. Both models guarantee precise display via the integrated OLED screen with 1440x1080 pixels. The frame rate of 50 Hz ensures smooth display. Zoom: 2x-8x digital zoom Weight: 424 g – ultra-light and ideal for longer uses Battery life: Up to 5 hours of continuous operation thanks to the rechargeable type-18650 battery. Temperature resistance: Works reliably at temperatures from -30°C to +55°C. User-friendliness and Efficiency: The intuitive operation with a multi-directional control button makes handling easier, even with gloves. Thanks to the improved battery compartment design, the battery can be easily replaced without having to recalibrate the device – ideal for field use. Additionally, the integrated recoil detection ensures automatic video recording with each shot, capturing valuable moments. Flexibility in Application: The device offers six color modes for individual temperature display and three scene modes to adapt to different environments. The integrated laser rangefinder makes additional distance measurement devices unnecessary and increases efficiency while hunting. The PARD Predator 640/480 sets new standards in thermal imaging technology and offers hunters a versatile and reliable solution – day, night, and under the harshest conditions. Technical Data:  Sensor resolution: 480 x 360 px Lens (Thermal): 35 mm Pixel interval: 12 μm Frame rate: 50 Hz NETD: ≤ 18 mK Magnification: 1x Display resolution: OLED 1920 x 1080 px LRF: 1000 m Field of view (H x V)°: 9.4° x 7.1° Field of view (H x V)m @100 m: 16.45 m x 12.41 m Detection range human: 1400 m Photo / Video resolution: 1024 x 768 px Operating temperature: -20° ~ 50 °C Weight: 424 g Scope of Delivery: Quick-Start-Guide, Warranty card, USB-C charging cable, 1 pc. 18650 battery, fabric bag, Allen key

PARD FT32 / FD1 Universal Quick-Release Adapter The PARD FT32 / FD1 Universal Quick-Release Adapter offers a premium solution for the quick and tool-free mounting of PARD FT32 thermal imaging devices and PARD FD1 night vision devices on riflescopes with objective lens outer diameters from 46mm to a maximum of 62mm. This adapter is characterized by its robust quick-release lever, which allows for attachment and detachment in seconds without compromising stability. Thanks to the generous clamping range, it provides a secure hold and flexibly adapts to various riflescopes. The delivery includes four different-sized reducing rings, offering versatile adjustment options and ensuring compatibility with various optics. This well-thought-out configuration makes mounting and dismounting particularly easy and efficient. For hunters and sports shooters looking for a reliable, flexible, and quick mounting solution for their PARD FT32 or PARD FD1, this quick-release adapter is the ideal choice.

PARD NV007V2 Night Vision Attachment Device Digital night vision attachment device for hunters and outdoor enthusiasts Extremely sensitive 2K sensor with a resolution of 2560x1440 pixels 14.5mm lens with a 1.4x base magnification 3-stage IR illuminator with up to 350m range Brilliant and large OLED display with a resolution of 1440x1080 pixels Compact and lightweight design Quick mounting & no zeroing necessary Attention: Only the adapters of the previous models PARD NV007 and NV007A fit! The adapters for the NV007S / SP are not compatible!  The PARD NV007V2 is a state-of-the-art digital night vision attachment device specifically designed for hunters and outdoor enthusiasts who want to extend their existing riflescopes for nighttime observation and hunting. Compared to the previous model NV007V, the NV007V2 offers an improved sensor with an impressive resolution of 2560 x 1440 pixels. The image is displayed on a high-quality OLED display with a resolution of 1440 x 1080 pixels. The device supports a frame rate of 30 Hertz in black and white mode and 60 Hertz in color mode. The integrated infrared illuminator (IR) with a wavelength of 850 nm and a range of up to 150 meters provides 5 watts of power and three brightness levels for optimal visibility at night. Performance Features The NV007V2 offers the proven functions of its predecessor and expands them with new, useful features. In addition to the ability to record video and images, the device has an integrated WiFi hotspot, allowing you to stream the image in real-time to your mobile device. Your recordings can be conveniently stored on an external SD card with up to 128 GB. The device is powered by a durable 18650 lithium-ion battery, which allows for up to 8 hours of continuous operation. Charging is done via a modern USB-C port, allowing the device to be operated on the go with the help of a power bank. Additionally, the PARD NV007V2 is water and dustproof according to IP67 certification, making it a reliable companion for long sits. Applications The PARD NV007V2 can be used both as a handheld observation device and as a night vision attachment device in conjunction with a riflescope. The connection to the eyepiece is made via an included adapter with a bayonet lock, allowing for a secure and quick mounting. A significant advantage of the attachment device is that the point of impact remains unchanged after mounting, eliminating the need for re-zeroing. Note: For use as an attachment device for hunting, the respective hunting regulations of the federal states apply. Please check with your local hunting or firearms authority to see if the use of night vision devices is allowed in your state. Product Highlights Dual-use night vision device Ideal as an attachment device for hunting or nighttime observation HD-CMOS sensor with 2560 x 1440 pixels Focusable IR illuminator (850 nm) with up to 150 m range WiFi function as well as image and video recording on an external SD card Water and dustproof according to IP67 Included in the Package: PARD NV007V2 night vision device Protective cover / transport bag O-ring set Insulating tape / adhesive tape 18650 type battery USB data cable type-C User manual Warranty card