RUSAN Modular Connector / Connector Available for various front attachments Two-part modular system with a bayonet system for high repeatability The RUSAN Modular Adapter consists of a clamping sleeve and a connector to allow for repeatable and precise mounting of the front attachment. The connector is screwed onto the front attachment and remains there permanently - even when disassembled. This ensures that the point of impact remains exactly the same after mounting or dismounting the front attachment. The connector is quickly connected to the clamping sleeve, which is clamped onto the daylight optic, via a bayonet closure. The RUSAN Connector / Connector is available for various thread types depending on your front attachment. M52x0,75 e.g. for InfiRay, Dedal, Leica, JahnkeM43x0,75 e.g. for Liemke, Nightpearl M46x0,75 e.g. for Nitehog, Electrooptic, Lahoux etc. M33,5x0,75 e.g. for Guide TA, Nitehoh Viper etc. M35x1 e.g. for Pulsar Krypton, Proton etc.  

RUSAN Modular clamp sleeve with screw Available in various sizes to fit your target optics Special sizes can be ordered on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamp sleeve and a connector to enable precise and repeatable mounting of the attachment device. The RUSAN Modular Adapter's clamp sleeve is clamped onto the daylight optics using a screw. The clamp sleeve remains permanently on the lens and is available in different sizes. Before ordering, please check the required size carefully by measuring the outside diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The value obtained is precisely the correct size you need. If you are unsure, please provide the type designation of your daylight optics when ordering.

Precise Hunting Duo Connector For absolutely repeatable mounting on the scope. Select the desired size according to the connection thread of your attachment The Duo-Connector has five locking lugs with which it can be easily, quickly and, above all, absolutely repeatably connected to all Präzise Jagen clamping sleeves. In order to screw the Duo connector firmly to the attachment, the connector has an internal thread in various selectable sizes. The Duo connector is made of high-quality aluminium in one piece and has an anodised surface that protects against corrosion. Select the correct internal thread to suit your attachment: for HIKMICRO Thunder TE19C, TH35C, TH35PC and TQ50C you need the Duo connector M52x0.75 mm and the HIKMICRO adapter ring. for InfiRay CL42, CH50, CML25 / Liemke Merlin 25, Merlin 35, Merlin 42 you need the Duo connector M52x0.75 mm for Guide/JSA TA435, TA450 you need the Duo connector M33,5x0,75 mm for Pulsar Proton XQ30 and Pulsar Krypton XG50 you need the Duo-Connector M35x1 mm

RUSAN Cover for MAR Clamping This cover fits on the clamping sleeve of the RUSAN Modular Adapter. The cover protects the lens of your daytime optics from unwanted scratches and dirt.

Precise hunting ferrule For absolutely repeatable mounting on the scope. Select the desired size according to your external lens diameter This clamping sleeve is part of the absolutely bulletproof and repeatable Precise Hunting Multi-Adapter. In order to achieve a repeatable connection between the riflescope and the attachment, the clamping sleeve is screwed tightly onto the objective over a length of 45mm and by means of 4 screws. The clamping sleeve remains permanently on your daylight optics to meet the highest precision requirements. The clamping sleeve is made of high-quality aluminum in one piece and is protected against corrosion by an anodized surface. The inside of the clamping sleeve is covered with a protective film that protects your optics from scratches and increases adhesion. The exact alignment of the clamping sleeve to the attachment is achieved with a special inner contour. On the front side is a serration - the basis for fast and repeatable mounting of the attachment by means of the Duo-Connector. The counterpart, the Duo connector, is firmly and permanently screwed onto the attachment. The Duo connector has five locking lugs with which both parts can be connected easily, quickly and, above all, with absolute repeat accuracy.  With the Duo Connector, you can easily use the attachment on different riflescopes. To determine the appropriate diameter for mounting the clamping sleeve, the outer diameter of the optic must be measured. Ideally, use a caliper gauge for this Purpose.  

RUSAN Cover for MAR Connector This cover is compatible with all connectors of the RUSAN Modular Adapter. The cover protects the eyepiece of your device from unwanted scratches and dirt.

The Rusan adapter is used to connect a daylight optic to the Hikmicro Thunder TE19C, TH35C, TH35PC, TQ35C, TQ50C thermal imaging attachment. To determine the appropriate diameter for mounting the Rusan adapter, the outer diameter of the optics must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge for this purpose. If you are unsure, please contact our team, specifying your optics (brand, model). Features: Simple mounting due to quick-release lever. Material: Aluminum Color: Black thread: M52x0,75 Scope of delivery: Rusan ARM-52 universal adapter Rusan reducing ring for Hikmicro Thunder

This is an adapter specifically designed for HIKmicro Thunder, Cheetah, and similar devices that use the same connection system. ATTENTION: Not suitable for the new Thunder 2.0 series. The main advantages of using a one-piece adapter are: Easier handling compared to the combination of a reducing ring and M52 adapter More stable construction More affordable - this adapter typically costs less than the M52 adapter plus HIK reducing ring.

The Rusan reduction ring is needed to use the universal Rusan quick release adapters ARM-52 with the HIKMICRO Thunder TH35C / TQ50C. The reduction ring is screwed into the thread of the Rusand adapter. Note: This is only the reduction ring to adapt the thread of the Rusan universal adapter with that of the HIKMICRO Thunder. If you need a complete adapter for your thermal imaging attachment, please order additionally the Rusan Q-R universal adapter ARM-52 with M52x0.75 thread.  

RUSAN Modular Clamp Sleeve Fix with 3 Screws

Conversion kit for Rusan modular adapter without quick-release lever (incl. screw and socket) Suitable for modular Rusan adapter clamps MAR-xx Includes new M5 Allen screw and special nut to replace the quick-release Lever.

The Rusan reduction ring is needed to use the universal Rusan quick release adapters also with the night vision attachment Guide TA435 / TA450. The reduction ring is screwed into the thread of the Rusand adapter. Compatible with the following devices: Guide TA435 Guide TA450 JSA TA435 JSA TA450 Nitehog Viper Night-Lux TA435 Lahoux Clip and many more devices with M33,5x0,75 thread.

The Rusan adapter is used to connect a daylight optic to a night vision or thermal imaging attachment with M52x0.75 thread. Many attachments are already equipped with the appropriate thread. However, due to the various thread adapters or reducing rings, the Rusan ARM-52 adapter can also be used beyond this and is compatible with almost all common night vision optics. To determine the appropriate diameter for mounting the Rusan adapter, the outer diameter of the optics must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge to do this. If you are unsure, please contact our team stating your optics (brand, model). Features: Simple mounting due to quick-release lever. Material: Aluminum Color: Black Thread: M52x0,75 Compatible with the following devices: InfiRay Mate InfiRay CL42 / CH50 / CH50W Liemke Merlin Liemke Luchs Hikmicro Thunder 2.0 Dedal 540 / 541 / 542 / 546 / 552 Jahnke DJ-8 NSV Lahoux D-545 / LV-81 uvm... By means of thread adapter also compatible with the following devices: Guide/JSA TA435 / TA450 / Nighthog Viper / Lahoux Clip (Reducing ring required ATA435) Hikmicro Thunder TE19C / TH35C / TH35PC / TQ35C / TQ50C (Reducing ring required ARRH1) Dipol (Reducing ring required ADN33) Nitehog TIR-M35 (Reducing ring required ATIR-M35) Pulsar Krypton (Reducing ring required ARRK2) Pulsar Forward F135 / F155 / FN455 (Reducing ring required AF135-F155-FN455) Pulsar Core / DFA75 / DN55 (Reducing ring required ADAF75-V3) Lahoux LV-21 / ATN PS22, Armasight CO-MR/Mini (Reducing ring required APS22) Bering Optics Night Probe (Reducing ring required ABONP) Electrooptic (Reducing ring required ATEO) GT-Nano (Reducing ring required AGTN) uvm.

Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.    

The lock nut fits all attachments and adapters with an M52 external thread and is used to secure connectors and adapters with a missing or insufficient lock ring. Thanks to the cut-outs, the lock nut can be fastened/loosened with a hook wrench (not included).

Conversion set for Rusan Modular Adapters from screw to quick-release lever (including screw) Suitable for modular Rusan adapter clamps MAR-xx Includes a new hex screw M5 and quick-release lever that replaces the regular screw.

RUSAN Modular clamp sleeve with clamp Available in various sizes to fit your target optics Special sizes can be ordered on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamp sleeve and a connector to enable precise and repeatable mounting of the attachment device. The RUSAN Modular Adapter's clamp sleeve is clamped onto the daylight optics using a clamp. The clamp sleeve remains permanently on the lens and is available in different sizes. Before ordering, please check the required size carefully by measuring the outside diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The value obtained is precisely the correct size you need. If you are unsure, please provide the type designation of your daylight optics when ordering.

The Rusan reduction ring reduces the thread from M52x0.75 (outer) to M43x0.75 (inner) and is required to use the universal Rusan quick-release adapters ARM-52 with Nightpearl or NightSeer night vision attachments or the Liemke Merlin 35. The reduction ring is screwed into the thread of the Rusan adapter. Compatible with the following devices: Liemke Luchs NightPearl Seer Cono Seer Liemke Merlin 35 Also suitable for other devices with M43x0.75 internal thread.

Precise hunting torque wrench Torque wrench with 1nm and 2.5mm hex bit for mounting the Precision Hunting ferrule on your daylight optics.

Precise hunting dust plug for attachment With the Precision Hunting Dust Plug, you can seal the Duo Connector so that your attachment remains protected from dirt, moisture and damage on the eyepiece side during Transport.    

The Rusan adapter is used to connect an optic to the Guide TA435 or Guide TA450 and many other thermal imaging camera attachments with M33.5x0.75 thread. To determine the appropriate diameter for the Rusan mount, the outer diameter of the optic must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge for this purpose. If you are unsure, contact our team specifying your optic (brand, model). Compatible with the following devices: Guide TB630 Guide TB430 Guide TA435 Guide TA450 JSA TA435 JSA TA450 Nitehog Viper Night-Lux TA435 Lahoux Clip ...

The lock nut fits on attachments and reducing rings with an M52 external thread and is used to secure connectors and adapters. The milled recesses allow the lock nut to be fastened and loosened with a hook wrench.

RUSAN Converter M52 Upgrade from ARM52 Universal Adapter to MAR Modular Adapter Now easily use the conventional standard adapter as a modular adapter system Exciting news for owners of an "old" conventional Rusan adapter: The innovative MAR-M52 Converter allows you to utilize your existing Rusan Standard Adapter ARM52-X with the new modular adapter system from Rusan. Advantages of the Rusan MAR-M52 Converter: The use of older standard adapters remains possible. Compatible with third-party products such as Smartclip, Jahnke, etc. Converts your old M52 adapter to the modern Rusan-MAR adapter system.

The RUSAN reducing ring is required to use the universal RUSAN quick-release adapter ARM-52 with the Pulsar Krypton or Proton thermal imaging attachment. The reduction ring is screwed into the thread of the RUSAN adapter. Compatible with the following devices: Pulsar Krypton Pulsar Proton This adapter does not provide screen positioning.