Quick-release screw made of anodized T25 steel for the PARD Uni-Adapter Suitable for PARD NV007, NV007A, NV007S & SYTONG HT-66 The screws are suitable for all Pard Uni-Adapters in all sizes. Advantages of the quick-release screw: The Allen screws of the aluminum adapter are unnecessary. Simply turn out the original screws from your PARD adapter and replace them with a single quick-release screw. With the quick-release screw, you can now close or open the PARD Uni-Adapter within seconds, without handling the original Allen screws of the adapter. Technical data: • Material - T25 anodized steel • Screw length 3.5 cm Attention: The adapter shown in this offer is not included in the scope of delivery. If you also need the adapter, you will find a suitable set in our shop.

Made of rubber, 0.5, 1, 1.5, 2, 2.5, 3 mm thick.

PARD standard adapter with quick-release screw Available in Ø 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Suitable for: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Adapter set consisting of the PARD standard adapter with a quick-release screw for tool-free mounting Mount the PARD onto your optics in seconds using the quick-release screw, without any tools. Choose the size according to the outside diameter of your eyepiece. Intermediate sizes can be compensated for using the separately available rubber adapter ring set (item no.: WA-1203), allowing the adapter to be mounted without any wobbling. Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

PARD NV007S / SP Standard Adapter (with reducer sleeves) Available in Ø 45mm and 48mm with reducer sleeves Available in Ø 40.3mm and 42mm without reducer sleeves Compatible with: PARD NV007S / SP ALU adapter suitable for mounting the PARD NV007S / SP onto a corresponding rifle scope. The new standard adapter for the PARD NV007S / SP night vision device is available in sizes 45mm and 48mm with three differently sized reducer sleeves included. The included reducer rings come in sizes: 2.35mm, 1.5mm, and 0.8mm. NOTE: The reducer rings are only included with the 45mm and 48mm adapters. Choose the size according to the outer diameter of your eyepiece. The 45mm adapter can be reduced to fit eyepieces with a diameter of up to approximately 37mm. Please note that this adapter is not compatible with the previous versions of PARD (NV007/A).

RUSAN Quick-Release Adapter for PARD NV007S / SP Available in Ø 43mm, 45.5mm, and 47mm Very fast tool-free assembly and disassembly. Included are 4 non-slip inserts in various sizes for a secure hold. Mount the PARD night vision device on your optics in seconds with the RUSAN Quick-Release Adapter, without the need for any tools. The RUSAN adapter has a non-slip rubber interior and protects the riflescope from unwanted scratches. Choose the size that corresponds to the outer diameter of your eyepiece. Intermediate sizes can be compensated for using the four different sizes of non-slip inserts, allowing the adapter to be mounted securely. Sizes: Adapter 43mm fits eyepieces with 40.5mm - 43mm Ø Adapter 45.5mm fits eyepieces with 43mm - 45.5mm Ø Adapter 47mm fits eyepieces with 44.5mm - 47mm Ø Which combination is suitable for the outer diameter of my riflescope eyepiece? Adapter Size without insert 0,25 mm grey insert 0,5 mm blue insert 0,75 mm black insert 1,00 mm white insert 43 42,5 - 43,0 mm 42,0 - 42,4 mm 41,5 - 41,9 mm 41,0 - 41,4 mm 40,5 - 40,9 mm  45,5 45,0 - 45,5 mm 44,5 - 44,9 mm 44,0 - 44,4 mm 43,5 - 43,9 mm 43,0 - 43,4 mm 47 46,5 - 47,0 mm 46,0 - 46,4 mm 45,5 - 45,9 mm 45,0 - 45,4 mm 44,5 - 44,9 mm     Scope of delivery RUSAN quick-release adapter with bayonet lock Four different insert strips Hex key  

PARD Standard UNI-Adapter Available in Ø 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Suitable for: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 ALU adapter suitable for mounting the PARD NV007 / NV007A / NV007V and SYTONG HT-66 / HT-77 / HT-770 / HT-88 onto a corresponding riflescope. The standard adapter for the PARD night vision device is available in sizes 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm. Select the size that corresponds to the outer diameter of your eyepiece. Intermediate sizes can be compensated for with the separately available rubber adapter ring set (item no.: WA-1203), so that the adapter can be mounted securely. Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

PARD Universal Adapter For all scopes with Ø 35.2 - 47.0mm ocular diameter Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Easy and fast mounting and dismounting with just a few moves With the PARD Universal Adapter, the compensation between scope ocular and adapter can be easily and conveniently adjusted by using two different sized PVC adapter spacers. Therefore, no compensation with rubber rings or adhesive tape is necessary anymore. Mounting instructions: Loosen the fixing ring from the adapter and place it on the ocular of your scope. Now, adjust the distance between the ocular and the adapter with the appropriate PVC spacer. Then, place the main part of the adapter on the ocular of your scope and screw it together with the fixing ring. Mounting note: For ocular diameters under/between 35.2mm Ø and 39.0mm Ø, use the small/medium-sized PVC spacer, and for all other scopes between 39.0mm Ø - 47.0mm Ø, only use the thick PVC spacer. Package includes: PARD Universal Adapter with bayonet lock 3 pieces of PVC spacer Fixing ring Note: The PARD Universal Adapter is not suitable for Blaser R93/R8 rifles, as the closing mechanism of the adapter ring blocks during the repeating process.

PARD Universal-Adapter for all riflescopes with Ø 36.0-47.0mm eyepiece diameter Compatible with: PARD NV007S / SP Easy and fast installation and removal with just a few steps Using the PARD Universal Adapter, the compensation between the rifle scope eyepiece and adapter can be easily and uncomplicatedly made through three different-sized PVC adapter distance rings. Therefore, no more compensation with rubber rings or tape is necessary. Only with riflescopes under Ø 36.0mm, additional tape is needed to compensate, in addition to the PVC rings. Assembly Instructions: Loosen the fixing ring from the adapter and place it on the eyepiece of your rifle scope. Now, using the appropriate PVC distance ring, adjust the distance between the eyepiece and the adapter. Next, place the main part of the adapter onto your rifle scope eyepiece and screw it in with the fixing ring. Included: PARD NV007S / SP Universal Adapter with bayonet lock 3 PVC distance rings Fixing ring Note: The PARD Universal Adapter is not suitable for Blaser R93/R8 rifles, as the locking of the adapter ring is blocked during the repeating process.

PVC reducing rings made of high-quality plastic for placing underneath. The rings are UV and frost-resistant, so they will not break even after extended use. Available in 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, and 3.0mm.

PARD NV007S / SP Standard Adapter Quick Release Screw Available in Ø 45 mm and 48 mm with reducing sleeves Available in Ø 40.3 mm and 42 mm without reducing sleeves Suitable for: PARD NV007S / SP Aluminum adapter suitable for tool-free mounting of the PARD NV007S / SP onto a corresponding rifle scope with a quick release screw. Mount the PARD onto your optic quickly and easily with the quick release screw, without any tools needed. The new standard adapter for the PARD NV007S / SP night vision device is available in sizes 45mm and 48mm with three different sized reducing sleeves. The included reducing rings come in sizes: 2.35mm, 1.5mm, and 0.8mm. ATTENTION: The reducing rings are only included with the 45mm and 48mm adapters. Choose the size that corresponds to the outer diameter of your eyepiece. The 45mm adapter can be reduced to fit an eyepiece diameter of up to approximately 37mm. Please note that this adapter is not compatible with the previous versions of PARD (NV007/A).

RUSAN quick release adapter for PARD NV007S / SP for Swarovski Z6i V2 Fits Swarovski Z6i Gen. 2 Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD quickly and easily with the quick release adapter in seconds, without any tools on your Swarovski optics. The non-slip, rubberized interior protects your optics from scratches and holds them securely with the clamp adapter. Features Rolling latch Lever Bayonet lock for holding the PARD NV007S / SP Suitable for Swarovski Z6i Gen. 2 Material: Aircraft-grade aluminum Rubberized interior

PARD Quick Release Adapter Available in Ø 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super-fast and tool-free installation Mount and dismount your PARD onto your optic in seconds without any tools, using the Quick Release Adapter. Choose the size that matches the outside diameter of your ocular lens. Intermediate sizes can be compensated for with the separately available rubber adapter ring set (Article No.: WA-1203) for a wobble-free mount. Features Quick-Release Lever Bajonett Connector for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Suitable for almost all rifle scopes Material: Duraluminium

RUSAN Quick Release Adapter for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Available in Ø 43mm, 45.5mm, and 47mm. Compatible with: PARD NV007 / NV007A, SYTONG-HT66. Quick and tool-free mounting and dismounting. Includes 4 non-slip inserts in different sizes for a secure fit. Mount your PARD or SYTONG night vision device onto your optic in seconds using the RUSAN Quick-Release Adapter without any tools. The Rusan adapter's rubberized interior is non-slip and protects the scope from unwanted scratches. Select the size based on the outside diameter of your eyepiece. Intermediate sizes can be compensated for using the four different-sized non-slip inserts, allowing the adapter to be securely mounted. Sizes: Adapter 43mm fits eyepieces with 40.5mm - 43mm Ø Adapter 45.5mm fits eyepieces with 43mm - 45.5mm Ø Adapter 47mm fits eyepieces with 44.5mm - 47mm Ø Which combination is suitable for the outside diameter of my scope's eyepiece? Adapter Size without insert 0,25 mm grey insert 0,5 mm blue insert 0,75 mm black insert 1,00 mm white insert 43 42,5 - 43,0 mm 42,0 - 42,4 mm 41,5 - 41,9 mm 41,0 - 41,4 mm 40,5 - 40,9 mm  45,5 45,0 - 45,5 mm 44,5 - 44,9 mm 44,0 - 44,4 mm 43,5 - 43,9 mm 43,0 - 43,4 mm 47 46,5 - 47,0 mm 46,0 - 46,4 mm 45,5 - 45,9 mm 45,0 - 45,4 mm 44,5 - 44,9 mm   Scope of delivery: Rusan quick release adapter with bayonet lock  Four different insert strips Allen wrench Please note that this adapter is not compatible with the new PARD successor NV007S /SP.

RUSAN Quick Release Adapter for PARD NV007S / SP for Zeiss V8 Fits for Zeiss V8 Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD onto your Zeiss optics in seconds without any tools, using the quick release adapter. The non-slip, rubberized inner liner protects your optics from scratches and holds them securely in place with the clamp adapter. Features Roller lock lever Bayonet mount for PARD NV007S / SP Fits for Zeiss V8 Material: Aircraft aluminum Rubberized interior

RUSAN Quick Release Adapter for PARD NV007S / SP for Swarovski Z8i Fits Swarovski Z8i Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD onto your Swarovski optics in seconds using the quick-release adapter, without any tools. The non-slip, rubberized interior liner protects your optics from scratches and securely holds them in place with the clamp adapter. Features: Roller latch Lever Bayonet mount for PARD NV007S / SP Compatible with Swarovski Z8i Material: Aircraft-grade aluminum Rubberized interior liner

PARD Quick Release Adapter for Swarovski Z6i V1 / Zeiss Duralyt Fits Swarovski Z6i Gen. 1 / Zeiss Duralyt Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD or SYTONG onto your Swarovski or Zeiss optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Swarovski Z6i Gen. 1 / Zeiss Duralyt Material: Duraluminium Product image may vary!

PARD NV007S / SP Quick Release Adapter for Zeiss Conquest DL Only suitable for older Conquest models (for the current Conquest V4/V6, you can use the normal quick release adapter) Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD onto your Swarovski optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Zeiss Conquest DL Material: Duraluminium Product image may vary!    

PARD NV007S / SP Quick Release Adapter Available in Ø 38.8mm, 40.3mm, 42mm, 45mm, 46.5mm, and 48mm Suitable for: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD to your optic in seconds with the quick release adapter without any tools. Choose the size according to the outside diameter of your ocular. Intermediate sizes can be compensated for with the separately available rubber adapter ring set (item no.: WA-1203), so that the adapter can be mounted without any wobbling. Features Quick-release Lever Bayonet lock for attaching the PARD NV007S / SP Suitable for almost all scopes Material: Duraluminium  

RUSAN Quick Release Adapter for PARD NV007S / SP for Leica Magnus Gen. 2 Fits Leica Magnus Gen. 2 Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD onto your Zeiss optics in seconds using the quick-release adapter, without any tools. The non-slip, rubberized interior liner protects your optics from scratches and securely holds them in place with the clamp adapter. Features: Roller latch Lever Bayonet mount for PARD NV007S / SP Compatible with Leica Magnus Gen. 2 Material: Aircraft-grade aluminum Rubberized interior liner

PARD Quick Release Adapter for Swarovski Z6i V1 / Zeiss Duralyt Fits Swarovski Z6i Gen. 1 / Zeiss Duralyt Compatible with PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super fast and tool-free installation Mount and dismount the PARD or SYTONG onto your Swarovski or Zeiss optic in seconds with the quick release adapter, without the need for any tools. Features: Roller lock lever Bayonet mount for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Compatible with Swarovski Z6i Gen. 1 / Zeiss Duralyt Material: Duraluminium Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

PARD Quick Release Adapter for Swarovski Z6i V2 Only suitable for Swarovski Z6i Gen. 2 Compatible with: PARD NV007S / SP Super fast and tool-free installation Mount and dismount the PARD onto your Swarovski optic using the quick release adapter in seconds without any tools. Features Rolling lock Lever Bayonet lock for attaching the PARD NV007S / SP Compatible with Swarovski Z6i Gen. 2 Material: Duraluminium Product image may vary!

PARD quick release adapter for Zeiss Conquest DL Only compatible with older Conquest models (for the current Conquest V4/V6, you can use the regular quick release adapter) Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super fast and tool-free installation Mount and dismount your PARD onto your Zeiss Conquest DL in seconds with the quick release adapter, without any tools needed. Features Rolling locking Lever Bayonet mount for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Compatible with Zeiss Conquest DL Material: Duraluminium Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

SYTONG / PARD quick release adapter for Zeiss V8 / Leica Magnus Gen. 1 Only compatible with Leica Magnus Gen. 1 scopes Compatible with: PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Super fast and tool-free installation Mount and dismount your PARD onto your Leica (Gen.1) or Zeiss optic in seconds with the quick release adapter, without any tools needed. Features Rolling locking lever Bayonet mount for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Compatible with Zeiss V8 / Leica Magnus (Gen. 1 only) Material: Duraluminium Note: For Leica Magnus Gen. 2, currently only adapters from Rusan are compatible. Please call us if you are unsure which adapter is needed. Please note that this adapter is not compatible with the new PARD successor NV007S / SP.

RUSAN Quick Release Adapter for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 for Leica Magnus Gen. 2 Fits Leica Magnus Gen. 2 Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD quickly and easily onto your Leica optic using the quick release adapter without any tools. The non-slip, rubberized interior lining protects your optics from scratches and holds it securely in place with the clamping adapter. Features Rolling shutter lever Bayonet mount for the PARD NV007/A/Sytong HT-66 Fits Leica Magnus Gen. 2 Material: Aircraft aluminum Rubberized interior Please note that this adapter is not compatible with the new PARD successor NV007S.