Rusan
Filter
Filter
–
Filter
–
RUSAN Modular Adapter MAR Connector
RUSAN Modular Connector / Connector Available for various front attachments Two-part modular system with a bayonet system for high repeatability The RUSAN Modular Adapter consists of a clamping sleeve and a connector to allow for repeatable and precise mounting of the front attachment. The connector is screwed onto the front attachment and remains there permanently - even when disassembled. This ensures that the point of impact remains exactly the same after mounting or dismounting the front attachment. The connector is quickly connected to the clamping sleeve, which is clamped onto the daylight optic, via a bayonet closure. The RUSAN Connector / Connector is available for various thread types depending on your front attachment. M52x0,75 e.g. for InfiRay, Dedal, Leica, JahnkeM43x0,75 e.g. for Liemke, Nightpearl M46x0,75 e.g. for Nitehog, Electrooptic, Lahoux etc. M33,5x0,75 e.g. for Guide TA, Nitehoh Viper etc. M35x1 e.g. for Pulsar Krypton, Proton etc.
€69.00*
RUSAN Modular Adapter MAR Clamping with Screw
RUSAN Modular clamp sleeve with screw Available in various sizes to fit your target optics Special sizes can be ordered on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamp sleeve and a connector to enable precise and repeatable mounting of the attachment device. The RUSAN Modular Adapter's clamp sleeve is clamped onto the daylight optics using a screw. The clamp sleeve remains permanently on the lens and is available in different sizes. Before ordering, please check the required size carefully by measuring the outside diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The value obtained is precisely the correct size you need. If you are unsure, please provide the type designation of your daylight optics when ordering.
€159.00*
RUSAN Cover for RUSAN Modular Clamping
RUSAN Cover for MAR Clamping
This cover fits on the clamping sleeve of the RUSAN Modular Adapter. The cover protects the lens of your daytime optics from unwanted scratches and dirt.
€24.90*
RUSAN Cover for RUSAN Modular Connector (clip-on)
RUSAN Cover for MAR Connector
This cover is compatible with all connectors of the RUSAN Modular Adapter. The cover protects the eyepiece of your device from unwanted scratches and dirt.
€24.90*
RUSAN Q-R Adapter for Hikmicro Thunder
The Rusan adapter is used to connect a daylight optic to the Hikmicro Thunder TE19C, TH35C, TH35PC, TQ35C, TQ50C thermal imaging attachment. To determine the appropriate diameter for mounting the Rusan adapter, the outer diameter of the optics must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge for this purpose. If you are unsure, please contact our team, specifying your optics (brand, model). Features: Simple mounting due to quick-release lever. Material: Aluminum Color: Black thread: M52x0,75 Scope of delivery: Rusan ARM-52 universal adapter Rusan reducing ring for Hikmicro Thunder
€159.00*
RUSAN Q-R One Piece Adapter for Hikmicro Thunder
This is an adapter specifically designed for HIKmicro Thunder, Cheetah, and similar devices that use the same connection system. ATTENTION: Not suitable for the new Thunder 2.0 series. The main advantages of using a one-piece adapter are: Easier handling compared to the combination of a reducing ring and M52 adapter More stable construction More affordable - this adapter typically costs less than the M52 adapter plus HIK reducing ring.
€159.00*
RUSAN Q-R universal adapter ARM-52 with M52x0.75 thread
The Rusan adapter is used to connect a daylight optic to a night vision or thermal imaging attachment with M52x0.75 thread. Many attachments are already equipped with the appropriate thread. However, due to the various thread adapters or reducing rings, the Rusan ARM-52 adapter can also be used beyond this and is compatible with almost all common night vision optics. To determine the appropriate diameter for mounting the Rusan adapter, the outer diameter of the optics must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge to do this. If you are unsure, please contact our team stating your optics (brand, model). Features: Simple mounting due to quick-release lever. Material: Aluminum Color: Black Thread: M52x0,75 Compatible with the following devices: InfiRay Mate InfiRay CL42 / CH50 / CH50W Liemke Merlin Liemke Luchs Hikmicro Thunder 2.0 Dedal 540 / 541 / 542 / 546 / 552 Jahnke DJ-8 NSV Lahoux D-545 / LV-81 uvm... By means of thread adapter also compatible with the following devices: Guide/JSA TA435 / TA450 / Nighthog Viper / Lahoux Clip (Reducing ring required ATA435) Hikmicro Thunder TE19C / TH35C / TH35PC / TQ35C / TQ50C (Reducing ring required ARRH1) Dipol (Reducing ring required ADN33) Nitehog TIR-M35 (Reducing ring required ATIR-M35) Pulsar Krypton (Reducing ring required ARRK2) Pulsar Forward F135 / F155 / FN455 (Reducing ring required AF135-F155-FN455) Pulsar Core / DFA75 / DN55 (Reducing ring required ADAF75-V3) Lahoux LV-21 / ATN PS22, Armasight CO-MR/Mini (Reducing ring required APS22) Bering Optics Night Probe (Reducing ring required ABONP) Electrooptic (Reducing ring required ATEO) GT-Nano (Reducing ring required AGTN) uvm.
€148.90*
RUSAN Fixed mounting screw kit for Rusan Modular MAR adapter
Conversion kit for Rusan modular adapter without quick-release lever (incl. screw and socket) Suitable for modular Rusan adapter clamps MAR-xx Includes new M5 Allen screw and special nut to replace the quick-release Lever.
€9.90*
RUSAN reducing ring ARRH1-2 for HIKMICRO Thunder
The Rusan reduction ring is needed to use the universal Rusan quick release adapters ARM-52 with the HIKMICRO Thunder TH35C / TQ50C. The reduction ring is screwed into the thread of the Rusand adapter. Note: This is only the reduction ring to adapt the thread of the Rusan universal adapter with that of the HIKMICRO Thunder. If you need a complete adapter for your thermal imaging attachment, please order additionally the Rusan Q-R universal adapter ARM-52 with M52x0.75 thread.
€29.90*
RUSAN Q-R Quick Adapter for PARD NV007S / SP
RUSAN Quick-Release Adapter for PARD NV007S / SP Available in Ø 43mm, 45.5mm, and 47mm Very fast tool-free assembly and disassembly. Included are 4 non-slip inserts in various sizes for a secure hold. Mount the PARD night vision device on your optics in seconds with the RUSAN Quick-Release Adapter, without the need for any tools. The RUSAN adapter has a non-slip rubber interior and protects the riflescope from unwanted scratches. Choose the size that corresponds to the outer diameter of your eyepiece. Intermediate sizes can be compensated for using the four different sizes of non-slip inserts, allowing the adapter to be mounted securely. Sizes: Adapter 43mm fits eyepieces with 40.5mm - 43mm Ø Adapter 45.5mm fits eyepieces with 43mm - 45.5mm Ø Adapter 47mm fits eyepieces with 44.5mm - 47mm Ø Which combination is suitable for the outer diameter of my riflescope eyepiece? Adapter Size without insert 0,25 mm grey insert 0,5 mm blue insert 0,75 mm black insert 1,00 mm white insert 43 42,5 - 43,0 mm 42,0 - 42,4 mm 41,5 - 41,9 mm 41,0 - 41,4 mm 40,5 - 40,9 mm 45,5 45,0 - 45,5 mm 44,5 - 44,9 mm 44,0 - 44,4 mm 43,5 - 43,9 mm 43,0 - 43,4 mm 47 46,5 - 47,0 mm 46,0 - 46,4 mm 45,5 - 45,9 mm 45,0 - 45,4 mm 44,5 - 44,9 mm Scope of delivery RUSAN quick-release adapter with bayonet lock Four different insert strips Hex key
€114.90*
RUSAN Counter-nut M52x0.75 with screw for self positioning
The lock nut fits all attachments and adapters with an M52 external thread and is used to secure connectors and adapters with a missing or insufficient lock ring. Thanks to the cut-outs, the lock nut can be fastened/loosened with a hook wrench (not included).
€24.90*
RUSAN Rubber eyepiece with adapter for RUSAN modular connector
RUSAN Eyepiece for MAR Connector
With this eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device.
The rubberized eyepiece has no magnification.
€59.90*
RUSAN Quick-Release Kit for Rusan Modular MAR Adapter
Conversion set for Rusan Modular Adapters from screw to quick-release lever (including screw)
Suitable for modular Rusan adapter clamps MAR-xx
Includes a new hex screw M5 and quick-release lever that replaces the regular screw.
€14.90*
RUSAN reducing ring ATA435 for Guide TA435 / TA450 / LAHOUX clip / Nitehog Viper
The Rusan reduction ring is needed to use the universal Rusan quick release adapters also with the night vision attachment Guide TA435 / TA450. The reduction ring is screwed into the thread of the Rusand adapter. Compatible with the following devices: Guide TA435 Guide TA450 JSA TA435 JSA TA450 Nitehog Viper Night-Lux TA435 Lahoux Clip and many more devices with M33,5x0,75 thread.
€23.90*
RUSAN reducing ring M43x0,75 for Liemke Luchs, Seer, NightSeer, Merlin 35, Cono, NightPearl, Horus
The Rusan reduction ring reduces the thread from M52x0.75 (outer) to M43x0.75 (inner) and is required to use the universal Rusan quick-release adapters ARM-52 with Nightpearl or NightSeer night vision attachments or the Liemke Merlin 35. The reduction ring is screwed into the thread of the Rusan adapter. Compatible with the following devices: Liemke Luchs NightPearl Seer Cono Seer Liemke Merlin 35 Also suitable for other devices with M43x0.75 internal thread.
€19.90*
RUSAN Magnification ocular 2.5x with adapter for RUSAN modular connector
RUSAN 2.5x Magnification Eyepiece for MAR Connector
With this 2.5x magnification eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device.
€149.90*
RUSAN Q-R Adapter for Guide TA435 und TA450 / Nitehog / Lahoux / Night-Lux
The Rusan adapter is used to connect an optic to the Guide TA435 or Guide TA450 and many other thermal imaging camera attachments with M33.5x0.75 thread. To determine the appropriate diameter for the Rusan mount, the outer diameter of the optic must be measured with a tolerance of 0.5 millimeters. Ideally, use a caliper gauge for this purpose. If you are unsure, contact our team specifying your optic (brand, model). Compatible with the following devices: Guide TA435 Guide TA450 JSA TA435 JSA TA450 Nitehog Viper Night-Lux TA435 Lahoux Clip ...
€148.90*
RUSAN Q-R Quick-Adapter PARD NV007S / SP for Zeiss V8
RUSAN Quick Release Adapter for PARD NV007S / SP for Zeiss V8 Fits for Zeiss V8 Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD onto your Zeiss optics in seconds without any tools, using the quick release adapter. The non-slip, rubberized inner liner protects your optics from scratches and holds them securely in place with the clamp adapter. Features Roller lock lever Bayonet mount for PARD NV007S / SP Fits for Zeiss V8 Material: Aircraft aluminum Rubberized interior
€129.90*
RUSAN Magnification ocular 3x with adapter for RUSAN modular connector
RUSAN 3x Magnification Eyepiece for MAR Connector
With this 3x magnification eyepiece, you can easily and quickly convert your RUSAN Modular Adapter device with MAR connector into a handheld device.
€149.90*
RUSAN Q-R Quick-Adapter PARD NV007S / SP for Swarovski Z6i Gen. 2
RUSAN quick release adapter for PARD NV007S / SP for Swarovski Z6i V2 Fits Swarovski Z6i Gen. 2 Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD quickly and easily with the quick release adapter in seconds, without any tools on your Swarovski optics. The non-slip, rubberized interior protects your optics from scratches and holds them securely with the clamp adapter. Features Rolling latch Lever Bayonet lock for holding the PARD NV007S / SP Suitable for Swarovski Z6i Gen. 2 Material: Aircraft-grade aluminum Rubberized interior
€129.90*
RUSAN Modular Adapter MAR Clamping fixed with 3 screws 59 mm
Größe: 59 mm
RUSAN Modular Clamp Sleeve Fix with 3 Screws
€159.00*
RUSAN Q-R Fast-Adapter for SYTONG / PARD NV007A/V
RUSAN Quick Release Adapter for PARD NV007 / NV007A / NV007V, SYTONG HT-66 / HT-77 / HT-770 / HT-88 Available in Ø 43mm, 45.5mm, and 47mm. Compatible with: PARD NV007 / NV007A, SYTONG-HT66. Quick and tool-free mounting and dismounting. Includes 4 non-slip inserts in different sizes for a secure fit. Mount your PARD or SYTONG night vision device onto your optic in seconds using the RUSAN Quick-Release Adapter without any tools. The Rusan adapter's rubberized interior is non-slip and protects the scope from unwanted scratches. Select the size based on the outside diameter of your eyepiece. Intermediate sizes can be compensated for using the four different-sized non-slip inserts, allowing the adapter to be securely mounted. Sizes: Adapter 43mm fits eyepieces with 40.5mm - 43mm Ø Adapter 45.5mm fits eyepieces with 43mm - 45.5mm Ø Adapter 47mm fits eyepieces with 44.5mm - 47mm Ø Which combination is suitable for the outside diameter of my scope's eyepiece? Adapter Size without insert 0,25 mm grey insert 0,5 mm blue insert 0,75 mm black insert 1,00 mm white insert 43 42,5 - 43,0 mm 42,0 - 42,4 mm 41,5 - 41,9 mm 41,0 - 41,4 mm 40,5 - 40,9 mm 45,5 45,0 - 45,5 mm 44,5 - 44,9 mm 44,0 - 44,4 mm 43,5 - 43,9 mm 43,0 - 43,4 mm 47 46,5 - 47,0 mm 46,0 - 46,4 mm 45,5 - 45,9 mm 45,0 - 45,4 mm 44,5 - 44,9 mm Scope of delivery: Rusan quick release adapter with bayonet lock Four different insert strips Allen wrench Please note that this adapter is not compatible with the new PARD successor NV007S /SP.
€114.90*
RUSAN Q-R Quick-Adapter PARD NV007S / SP for Swarovski Z8i
RUSAN Quick Release Adapter for PARD NV007S / SP for Swarovski Z8i Fits Swarovski Z8i Super-fast and tool-free mounting Rubberized interior protects your optics from scratches! Mount and dismount the PARD onto your Swarovski optics in seconds using the quick-release adapter, without any tools. The non-slip, rubberized interior liner protects your optics from scratches and securely holds them in place with the clamp adapter. Features: Roller latch Lever Bayonet mount for PARD NV007S / SP Compatible with Swarovski Z8i Material: Aircraft-grade aluminum Rubberized interior liner
€129.90*
RUSAN Modular Adapter MAR Clamping with Clamp
Größe: 57 mm
RUSAN Modular clamp sleeve with clamp Available in various sizes to fit your target optics Special sizes can be ordered on request Two-part modular system for high repeatability The RUSAN Modular Adapter consists of a clamp sleeve and a connector to enable precise and repeatable mounting of the attachment device. The RUSAN Modular Adapter's clamp sleeve is clamped onto the daylight optics using a clamp. The clamp sleeve remains permanently on the lens and is available in different sizes. Before ordering, please check the required size carefully by measuring the outside diameter of your lens or alternatively by checking the technical data sheet of your daylight optics. The value obtained is precisely the correct size you need. If you are unsure, please provide the type designation of your daylight optics when ordering.
€159.00*