Precise hunting ferrule
For absolutely repeatable mounting on the scope.
Select the desired size according to your external lens diameter
This clamping sleeve is part of the absolutely bulletproof and repeatable Precise Hunting Multi-Adapter. In order to achieve a repeatable connection between the riflescope and the attachment, the clamping sleeve is screwed tightly onto the objective over a length of 45mm and by means of 4 screws. The clamping sleeve remains permanently on your daylight optics to meet the highest precision requirements.
The clamping sleeve is made of high-quality aluminum in one piece and is protected against corrosion by an anodized surface. The inside of the clamping sleeve is covered with a protective film that protects your optics from scratches and increases adhesion.
The exact alignment of the clamping sleeve to the attachment is achieved with a special inner contour. On the front side is a serration - the basis for fast and repeatable mounting of the attachment by means of the Duo-Connector. The counterpart, the Duo connector, is firmly and permanently screwed onto the attachment. The Duo connector has five locking lugs with which both parts can be connected easily, quickly and, above all, with absolute repeat accuracy. With the Duo Connector, you can easily use the attachment on different riflescopes.
To determine the appropriate diameter for mounting the clamping sleeve, the outer diameter of the optic must be measured. Ideally, use a caliper gauge for this Purpose.